Sharp IG-BC2UB IG-BC2UB Operation Manual - Page 18

TROUBLESHOOTING Problem The Plasmacluster Ion Generator does not work. Flashing faster (red) FILTER CLEAN UNIT WHAT TO DO • Is the Car Adapter connected properly? Please be sure it is definitely connected. • Does not a fuse blow? Replace with a new fuse. (See E-15) It is over the exchange period of Plasmacluster Ion Generating Unit. Replace with new Plasmacluster Ion Generating Unit. (See E-14) UNIT Flashing (red) Flashing (blue) Plasmacluster Ions are not released. Press the Mode Button and restart. Clean the electrode section of the unit. (See E-13) UNIT Flashing (blue) Other indication Is the Plasmacluster Ion Generating Unit installed correctly? (See E-13,14) Remove the unit, fully inserted again and press the Mode button. Failure Unplug and contact the store you purchased or Sharp Service Center. A discontinuous noise is heard. A clicking or ticking sound comes from the unit. The air flow decreases. The discharged air has odor. • Clicking or ticking sounds may be audible when the unit is generating ions. • Dust may block the filter, clean the filter. (See E-12) • Wind quantity sometimes becomes strong during operation with LOW mode, to confirm the condition of ion be not abnormal. • Filter is getting dirty. Clean the filter. (See E-12) • The Plasmacluster Ion Generator releases a small trace of ozone which may produce odor. This is not detrimental to health. E-16