Sharp KB-0333K KB-0333K Operation Manual / Installation Instructions - Page 9
Install Hood, Non-ducted Filters
View all Sharp KB-0333K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
1 Hang hood from (4) mounting screws. Slide hood towards wall until mounting screws are engaged in narrow end of (4) keyholes. Tighten mounting screws securely. A long screwdriver works best. INSTALL HOOD 4 Install (2) PAR20, 50 W Maximum Halogen Bulbs or (2) R16, 40 W Maximum Incandescent Bulbs. Purchase bulbs separately. 2 Replace bottom cover. 3 Connect ductwork to hood. Use duct tape to make joints secure and air tight. 5 Replace filters, turn on power at service panel and test for proper operation. If hood is to be installed Non-Ducted: • Purchase a set of (2) charcoal filters, model KBK-330, from your local distributor, retailer or from Sharp (see page 2). NON-DUCTED FILTERS • Attach charcoal filters to the aluminum mesh filters. Be sure that the sides with the blue and yellow stripes are facing down (toward the range top). 9