Sharp KB-3425L KB-3425LS , KB-3425LK , KB-3425LW Operation Manual - Page 30

OVEN cooking 2:40 PM DEC 22 Convection Reheat Bake Defrost Broil Micro Cook How to Set Oven Temperature for bake SET TEMP 1 Touch Bake pad. 2 Touch number pads or pre-set pads for 3 Touch START pad. When the oven desired temperature. reaches the programmed temperature, a signal will sound. To Change Set Temperature during Preheating or after oven is preheated: 1 Follow the steps 1-3 above. 4 During preheating, the Temp pad will appear in the lower right-hand corner of the touchscreen. Touch this pad to do the following: • Temp x 1: Check the set temperature. • Temp x 2: Change the set temperature. When you see 000o in the lower left-hand corner of the touchscreen, use the number pads to change the temperature, then touch START. • Temp x 3: Display shows the actual temperature during preheating. It will read "Temp Lo F" until the oven reaches 90oF. Once the oven is preheated, the Temp pad will remain in the display. By touching it once, you can change the set temperature using the number pads. Then touch START. If you touch it a second time, it will once again show the set temperature. How to Proof The Insight Range has an automatic setting for proofing bread dough at 100oF. You can access the "Proof" pad by touching the Bake pad. The oven temperature can also be set manually for 90-100oF for proofing bread dough. If you have just finished using the oven and the residual temperature is 105˚F or higher, when you enter 90-100˚F or select Proof and touch the START pad, the oven will display "OVEN TOO HOT". The oven will not start until it cools below 105˚F, a safe temperature for yeast. When the oven cools, the oven display will change to "Touch START". Simply touch the START pad and the oven will maintain 90-100˚F for proofing. 30