Sharp KB-6015KKC Installation Manual - Page 3

INSTALLATION MANUAL MICROWAVE DRAWER MEASUREMENTS 84" wall cabinet electrical outlet location 5" (6") 2x4 AntiTip block 3 1/2" 36" countertop height 4" 28 7/16" opening allow 3/4" overlap 23 1/2" min depth allow 3/4" overlap allow 1/4" overlap 14 3/4" opening 14 3/4" to bottom of Anti-Tip block allow 7/16" overlap floor must support 100 lbs. optional wall oven cutout illustrated in sketch 19" to top of floor electrical outlet location 5" 4" 28 7/16" opening allow 3/4" overlap 23 1/2" min depth allow 3/4" overlap 30" cabinet min. Figure 2 (6") 2x4 Anti-Tip block 3 1/2" 2" minimum allow 1/4" overlap 14 3/4" to bottom of Anti-Tip block 14 3/4" opening allow 7/16" overlap floor must support 100 lbs. *19" to top of floor (recommended) Figure 1 30" * cabinet min. NOTE: Open Top Cabinet illustrated Figures 1 and 2 contain many Microwave Drawer measurements for reference when planning the drawerʼs location. 4 11/16" 2" 28 1/8" 15" 15" auto drawer opening 14 19/32" 23 3/8" Figure 3 1 13/16" door thickness 30" ANTI-TIP BLOCK (6") 5" Figure 4 2x4 AntiTip block NORMAL INSTALLATION STEPS ANTI-TIP BLOCK INSTALLATION INSTRUCTIONS To reduce the risk of tipping of the drawer, the Anti-Tip block must be properly installed located 14 3/4-inches above the floor on which the Microwave Drawer will sit. The 6-inch 2 x 4 Anti-Tip block must be provided by the installer. See Figures 1, 2 and 4. The Anti-Tip block prevents serious injury that might result from spilled hot liquids. If the Microwave Drawer is ever moved to a different location, the Anti-Tip block must also be moved and installed. When installed to the wall, make sure that the screws completely penetrate the dry wall and are secured in wood or metal so that the block is totally stable. When fastening, be sure that the screws do not penetrate electrical wiring or plumbing. 3