Sharp KC-860U KC-860U Operation Manual - Page 13
Refilling The Water Tank
![]() |
UPC - 074000662605
View all Sharp KC-860U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH REFILLING THE WATER TANK The unit can be used in the Clean Air Mode without putting water in the Water Tank. When using the Clean Air & Humidify Mode, or the Quick Clean Mode, the Water Tank should be filled with water. 1 Remove the Water Tank by unlatching the top. 2 Remove the Water Tank Cap and carefully fill the Water Tank with tap water. • Change the water in the Water Tank every day with fresh tap water. Tank Cap Tank Handle Water Tank Humidifying Tray Water Tank 3 After filling, securely tighten the Tank Cap. • Check to see that there is no water leaking. • Be sure to wipe off any excess water on the outside of the Water Tank. • When carrying the Water Tank, hold it with both hands so that the Water Tank opening is facing up. tighten 4 Replace the Water Tank in the unit. • The top latch will "click" in place when the Water Tank is properly installed. CAUTION • Do not expose the unit to water. Short circuit and/or electrical shock may occur as a result. • Do not use hot water (104ºF or 40ºC), chemical agents, aromatic substances, dirty water, or other damaging substances, deformation and/or malfunction may occur. • Use only fresh tap water. Use of other water sources may promote the growth of mold, fun- gus and/or bacteria. E-11
![](/manual_guide/products/sharp-kc860u-kc860u-operation-manual-8ebb934/13.png)