Sharp LC-26SH10U Service Manual - Page 13
Service Mode List - screen
View all Sharp LC-26SH10U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
SERVICE MODE LIST This unit is provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote control for more than the standard time in the appropriate condition. (See below chart.) Set Condition Set Key Remocon Key TV mode VOL. DOWN (Minimum) 0 Standard Time Operations 2 sec. Releasing of V-CHIP PASSWORD. TV mode VOL. DOWN (Minimum) 1 2 sec. Initialization of factory TV data. NOTE: If you set factory initialization, the memories are reset such as the channel setting, and the POWER ON total hours. TV mode VOL. DOWN (Minimum) 6 2 sec. Can be checked of the INITIAL DATA of MEMORY IC. Refer to the "WHEN REPLACING EEPROM (MEMORY) IC". ALL mode VOL. DOWN (Minimum) 8 2 sec. Check of the SUM DATA, POWER ON total hours, MICON VERSION and DIGITAL TV MICON FIRMWARE on the screen. Refer to the "WHEN REPLACING EEPROM (MEMORY) IC". ALL mode VOL. DOWN (Minimum) 9 2 sec. Display of the Adjustment MENU on the screen. Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display Adjustment). C-1