Sharp LC-32GP2U Service Manual - Page 10
Quick Reference - service manual
UPC - 074000370791
View all Sharp LC-32GP2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
LC-32GP2U QUICK REFERENCE Detaching the Stand Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. CAUTION Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching the stand Before performing work make sure to turn off the TV. Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 1 Unfasten the four screws used to secure the stand in place. Setting the TV on the Wall CAUTION This TV should be mounted on the wall with both the AN-37AG2 (SHARP) wall mount bracket and the AN-37P30 (SHARP) attachment of the wall mount bracket. The TV cannot be mounted when with only the AN-37AG2 wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury. Using an optional bracket to mount the TV You can ask a qualified service professional about using an optional AN-37AG2 bracket to mount the TV to the wall. Carefully read the instructions that come with the bracket before beginning work. Hanging on the wall AN-37AG2 wall mount bracket. (See the bracket instructions for details.) 2 Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.) To attach the stand, perform the steps in reverse order. Vertical mounting Angular mounting About setting the TV angle 0°/5°/10°/15°/20° The center of the display: /11 16 inch (17.3 mm) under the "A" position. Refer to the operation manual of AN-37P30 for details. Detach the cable clamp on the rear of the TV when using the optional mount bracket. Due to the terminal configuration on this TV, when you wall-mount this model, make sure there is enough space between the wall and the TV for the cables. To use this TV mounted on a wall, first remove the adhesive tape at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV. 2 - 3