Sharp LC-32LB591U User Manual LC 32LB591U - Page 39
My TV doesn't
View all Sharp LC-32LB591U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
LC-32LB591U / LC-32LB591C 32" HD LED 720p Sharp Roku TV Symptom Poor picture Audio noise After images appear Possible cause Try this... Light in the viewing area • Make sure that the room is not too bright. Light reflecting off may be interfering the screen can make the picture difficult to see. A connected camera or camcorder may be interfering • If an S-VHS camera or a camcorder is connected while another connected device is turned on, the picture may be poor. Turn off one or more devices. Other devices may be interfering • Other devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from your TV to eliminate the interference. • Do not display a still image, such as a logo, game, or computer image, for an extended period of time. This can cause a permanent after-image to be burned into the screen. This type of damage is not covered by your warranty. Remote control Symptom Possible cause Try this... No power to TV • Make sure that the power cord is correctly connected to both your TV power connector and power outlet. See Connecting power on page 33. You should see an LED in the front of the TV panel when a button on the remote is pressed. If you see no LED activity, try another outlet or check your fuse box. My TV doesn't turn on using the remote control Line-of-sight obstructed Remote not responding • Make sure that no objects (or pets) are obstructing the line-of-sight from the remote control to the remote sensor on the front of your TV. See Aiming the remote control on page 34. • Open the battery compartment and make sure that the batteries are seated in the correct positions (+ and - in the correct positions). See Installing remote control batteries on page 34. • Make sure that the batteries are fresh and working correctly. Replace the batteries, if necessary. TV frozen • If the front LED is not responding, or abnormally bright, disconnect the power cord from the power outlet, wait a few seconds, then reconnect the power cord. Trouble programming your existing universal remote control Remote control may not be programmed correctly Batteries may be dead • For instructions on programing a universal remote control, visit: www.roku.com/universalremote • Refer to the User Guide that accompanied your universal remote control and contact the manufacturer if problems persist. • Replace dead batteries with new batteries. Refer to the User Guide that accompanied your universal remote control. 39