Sharp LC-32LS510UT LC-19LS40UT LC-22LS510UT LC-32LS510UT Operation Manual - Page 20
Watching TV
UPC - 074000372481
View all Sharp LC-32LS510UT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Watching TV Turning On/Off the Power Press POWER on the TV, or POWER on the remote control unit to turn the power on. •• POWER indicator (Blue): The TV is on. Press POWER on the TV, or POWER on the remote control unit again to turn the power off. •• The TV enters standby and the image on the screen disappears. POWER • If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet. • Small amount of electric power is still consumed even when the TV is turned off. • If there is no signal input for 15 minutes, the power will turn to standby mode automatically. Initial Setup When you turn on the TV for the first time, the Initial Setup will guide you through the setup process. Perform the following steps before you press POWER on the remote control unit. 111 Insert the batteries into the remote control unit. (See page 13.) 222 Connect the antenna cable to the TV. (See page 12.) 333 Plug in the AC cord to the AC outlet. (See page 10.) 111 Initial Setup • The Initial Setup screen display at the first use. Press ENTER to start the initial setup. Initial Setup Welcome Welcome to use the Wizard for Initial Setup !! Please press [ENTER] to start the wizard. 222 Language setting • Select the OSD menu language from English, Spanish, or French. • Press a/b to select the desired language listed on the screen, and then press the d button to the next step. Initial Setup Language Please select your language: English Español Français Back Select Next EXIT Exit 19