Sharp LC-37D4U LC-26GD4U LC-32GD4U LC-37GD4U Operation Manual - Page 12
Attaching speakers - base stand
UPC - 074000363014
View all Sharp LC-37D4U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Preparation Attaching speakers The illustration shows the LC-32GD4U. 1 5 Remove the terminal cover as shown in the illustration. 2 Attach the speaker terminal cover. 6 Insert the projecting bulges on the side of the speakers into the corresponding slots in the display. 3 Align nub of the bracket with the groove and slot it into place. 7 Screw (SILVER) Screw (BLACK) Fasten the screw. 4 Fasten the bracket with the screw. 8 Fasten the speaker cable with the holder. Connect the ends of the cable to the speaker terminals as shown in the illustration. Attach the terminal cover as shown in the illustration. CAUTION • Do not remove the stand and speaker from the Display unless using an optional bracket to mount it. • Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from being damaged. NOTE • Perform the same steps for right speaker. 11 • To attach the speakers, perform the steps in reverse order.