Sharp LC-37SH20U LC-37SH20U Operation Manual - Page 32
Reset, Input Select, Selecting input source, INPUT, ENTER, Selecting input signal type
UPC - 074000363359
View all Sharp LC-37SH20U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Useful adjustment settings Reset If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values. 1 Press MENU and the MENU screen displays. Input Select 2 Press c/d to select "Setup". 3 Press a/b to select "Reset", and then press ENTER. Selecting input source • If you already set the Secret No., input the Use this menu to select the input source. 4-digit secret number here. See page 38 for setting a secret number. • "Return to the factory preset values" displays on the screen. 1 Press INPUT. • A list of selectable sources appears. 4 Press c/d to select "Yes", and then press ENTER. • "Now, TV will restart automatically. OK?" displays on the screen. 2 Press INPUT again to select the input source. • An image from the selected source automatically displays. • You can also select the input source by pressing 5 Press c/d to select "Yes", and then press ENTER. a/b. • If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the • "Now Initializing" displays on the screen and equipment beforehand. blinks. • After the reset has completed, the power shuts off and then comes back on. The screen will have returned to its original settings. Selecting input signal type For setting the signal type of external equipment connected to INPUT 1 terminal. 1 Press MENU and the MENU screen displays. Now initializing NOTE • The AV MODE will be set to "STANDARD". • The Channel Setup settings will not be changed. • The Language settings will not be changed. • The Secret number settings will not be changed. 2 Press c/d to select "Option". 3 Press a/b to select "Input Select", and then press ENTER. 4 Press a/b to select the signal type you want to set, and then press ENTER. • If the selected signal type is incorrect, images are not displayed or displayed without any color. 5 Press MENU to exit. NOTE • If you set INPUT 1 to Auto, the TV will automatically select the input signal. • Check the operation manual of the external equipment for the signal type. • Setting INPUT 1 signal selection to "Auto" when other equipment is connected will result in the following connection priority. INPUT 1 1. COMPONENT VIDEO 2. VIDEO 31