Sharp LC-42D62U LC-42D62U Operation Manual - Page 7

Supplied accessories Make sure the following accessories are provided with the product. Remote control unit "AAA" size battery (g1) (g2) Page 8 Page 8 AC cord (g1) Page 7 Cable Clamp (g2) Cable tie (g1) Page 7 Stand unit (g1) Page 6 Operation manual (g1) NOTE • Always use the AC cord supplied with the TV. QUICK REFERENCE Attaching the stand • Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. 1 Confirm that there are 8 screws (4 short screws and 4 long screws) supplied with the TV. 3 1 Insert the stand into the openings on the bottom of the TV. 2 Insert and tighten the 4 long screws into the 4 holes on the rear of the TV. 2 Attach the two parts of the stand unit to each other using the 4 short screws and the hex key (supplied with the product) as shown. Hex key Long screw Soft cushion Hex key Short screw NOTE • To detach the stand, perform the steps in reverse order. 6