Sharp LC 42D64U LC-42D64U LC-46D64U LC-52D64U Operation Manual - Page 30

Basic adjustment settings Film Mode (3:2 pull-down) Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality. Selected item Description On Detects, analyzes, converts film source Off Normal viewing mode NOTE • "Film Mode" does not function when you set the "AV Mode" to "Game". • "Film Mode" is not selectable when channel display shows an input resolution of 480P, 720P, or 1080P. 3D-Y/C Provides high quality images with minimal dot crawl and cross color noise. Selected item Description Slow For still images Standard Normal adjustment Fast For moving images Off (2D) For Game Mode NOTE • 3D-Y/C is available for input signal from Composite Video and analog broadcasts (air and cable). Monochrome For viewing a video in monochrome. Selected item Description On For viewing in monochrome Off Normal color Range of OPC The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e16 and a minimum of f16. Selected item Description Max. f15 through e16 Min. f16 through e15 NOTE • The range of OPC settings are active only when the OPC is set to On. • The maximum setting cannot be set to a smaller number than the minimum setting. • The minimum setting cannot be set to a bigger number than the maximum setting. • Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small. 28 Sound adjustment You can adjust the sound quality to your preference with the following settings. 1 Press MENU to display the MENU screen, and then press c/d to select "Audio". Audio Power Control Treble [ 0] a15 b15 Bass [ 0] a15 b15 Balance [ 0] L R Surround [Off] Bass Enhancer [On] Reset 2 Press a/b to select a specific adjustment item. 3 Press c/d to adjust the item to the desired level. Selected item cbutton dbutton Treble For weaker treble For stronger treble Bass For weaker bass For stronger bass Balance Decrease audio from Decrease audio the right speaker from the left speaker 4 Press MENU to exit. NOTE • Audio menu is grayed out when Output Select is set to "Variable". • For resetting all Audio adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press c/d to select "Yes", and then press ENTER.