Sharp LC-42LB150U User Guide - Page 48

LC-42LB150U Sharp 42" LED TV Adjusting the computer image When you connect a computer to your TV using the PC IN jack, you may need to adjust the computer image to improve the quality. Note The PC option is only available when a computer is connected to the PC IN jack on the back of your TV. To adjust the computer image: 1 Make sure that your TV is in PC mode. For more information, see "Selecting the video input source" on page 39. 2 Press MENU. The on-screen menu opens. 3 Press W or X to highlight SETUP, then press ENTER. The SETUP menu opens. Adjusting the sound Adjusting sound settings You can adjust sound settings to improve the sound quality. You also can reset all sound settings to the factory default. To adjust sound settings: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SOUND, then press T or ENTER. The SOUND menu opens. 4 Press S or T to highlight PC, then press ENTER. The SETUP · PC menu opens. 5 Press S or T to highlight an option, then press ENTER to access the option. You can select: • Auto Adjust-Automatically adjusts the image settings such as position and phase. • H. Position-Moves the image right or left. • V. Position-Moves the image up or down. • Clock-Minimizes vertical stripes in the screen image. • Phase-Adjusts the focus of stable images. • Reset PC Settings-Resets all computer settings to factory mode. 6 Press W or X to adjust the option, or press S or T to select a setting. 7 Press MENU to return to the previous menu, or press EXIT to close the menu. 3 Press S or T to highlight an option, then press ENTER to access the option. You can select: • Sound Mode-Selects the sound mode. You can select: • Standard-Balances treble and bass. This setting is good for watching standard TV broadcasts. • Movie-Enhances treble and bass for a rich sound experience. This setting is good for watching DVDs, Blu-ray Discs, and HDTV. • Music-Preserves the original sound. This setting is good for listening to music. • Voice-Enhances vocals for TV audio. This setting is good for watching news broadcasts. • User-Lets you manually adjust sound settings. • Balance-Adjusts the balance between the left and right audio channels. • Bass-Adjusts the low sounds. • Treble-Adjusts the high sounds. • Speaker-Selects where the TV audio is played. You can select On (default setting) to play audio through the TV speakers, or select Off to turn off the TV speakers and play audio through a connected sound system. • Digital Audio Out-Sends digital audio to an external audio system. You can select: • Dolby Digital-Outputs the original digital audio sound. • PCM-Outputs audio in 2-channel stereo. • Audio Delay-Fine tunes the audio when it is not in sync with the video. 44 www.sharpusa.com