Sharp LC-42SV50U LC-32SV40U LC-42SV50U LC-46SV50U Operation Manual - Page 13
Preparation - picture settings
View all Sharp LC-42SV50U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially available). 2. A 300-ohm system is a flat "twin-lead" cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter (Commercially available). F-type connector 75-ohm coaxial cable (round) 300-ohm twin-lead cable (flat) When connecting the RF cable to the TV set, do not tighten F-type connector with tools. If tools are used, it may cause damage to your TV set. (The breaking of internal circuit, etc.) F-type connector 75-ohm coaxial cable Connecting Antenna Cable • Connect the antenna cable to the TV using one of the methods in the illustration as shown ( 1 , 2 , 3 or 4 ). 1 Cable without a CATV converter Cable TV lead-In Home Antenna terminal (75-ohm) 2 VHF/UHF antenna Coaxial cable (commercially available) 75-ohm coaxial cable (round) 3 Combination VHF/UHF antenna Home Antenna terminal (75-ohm) Coaxial cable (commercially available) 75-ohm coaxial cable (round) or 300-ohm twin-lead cable (flat) 4 Separate VHF/UHF antenna VHF UHF ANTENNA ANTENNA 300-ohm twin-lead cable 300-ohm twin-lead cable or 75-ohm coaxial cable 300/75-ohm adapter (commercially available) IN OUT Combiner (commercially available) To TV antenna terminal 11