Sharp LC-46SE941U-R LC-46SE94U LC-52SE94U LC-65SE94U Operation Manual - Page 49

Appendix Troubleshooting Problem • No power • Unit cannot be operated. • Remote control unit does not operate. • Picture is cut off/with sidebar screen. Possible Solution • Check if you pressed TV POWER on the remote control unit. (See page 15.) If the indicator on the TV does not light up, press POWER on the TV. • Is the AC cord disconnected? (See page 7.) • Has the power been turned on? (See page 15.) • External influences such as lightning, static electricity, may cause improper operation. In this case, operate the unit after first turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes. • Is the FUNCTION set correctly? Set it to the TV setting position. • Are batteries inserted with polarity (e, f) aligned? (See page 8.) • Are batteries worn out? (Replace with new batteries.) • Are you using it under strong or fluorescent lighting? • Is a fluorescent light illuminated near the remote control sensor? • Is the image position correct? (See page 26.) • Are screen mode adjustments such as picture size made correctly? (See page 19.) • Strange color, light color, or color • Adjust the picture tone. (See pages 22 and 23.) misalignment • Is the room too bright? The picture may look dark in a room that is too bright. • Check the input signal setting. (See page 25.) • Power is suddenly turned off. • No picture • Is the sleep timer set? (See page 16.) • Check the power control settings. (See page 24.) • The unit's internal temperature has increased. Remove any objects blocking vent or clean. • Is connection to other components correct? (See pages 13 and 14.) • Is correct input signal source selected after connection? (See page 29.) • Is the correct input selected? (See page 29.) • Is picture adjustment correct? (See pages 22 and 23.) • Is "On" selected in "Audio Only"? (See page 29.) • Is a non-compatible signal being input? (See page 50.) • No sound • Is the volume too low? (See page 16.) • Is "Variable" selected in "Output Select"? (See page 29.) • Have you pressed MUTE on the remote control unit? (See page 16.) • The TV sometimes makes a cracking sound. • This is not a malfunction. This happens when the cabinet slightly expands and contracts according to change in temperature. This does not affect the TV's performance. • The original home page cannot be displayed. • Some Internet functions used on a PC are not available from the TV. • Is the ETHERNET cable connected correctly? (See page 38.) • Check the settings of "Communication Setup" and "Interactive Service". (See page 39.) • The TV has only limited functions compared with regular PC browsers See page 41.) Troubleshooting-Digital Broadcasting The error message about reception of broadcast The example of an error message displayed on a screen • Failed to receive broadcast. • No broadcast now. Error code E202 E203 Possible Solution • Check the antenna cable. Check that the antenna is correctly setup. • Check the broadcast time in the program guide. 47