Sharp LC-52D85UN Owners Manual for LC-52D85UN - Page 24
Audio Menu
UPC - 074000371378
View all Sharp LC-52D85UN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
On-Screen Display Menu Gamma Adjustment Adjust mid-level brightness. The adjustment range of the gamma can be set to a maximum of +2 and a minimum of -2 by pressing c or d. Film Mode (3:2 pull-down) Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality. Advanced(High)/Advanced(Low): Select a desired level to remove jerkiness from film contents. Standard: Detects, analyzes, converts film source. Off: Normal viewing mode. • "Standard" does not function when channel display shows an input signal resolution of 480p, 720p or 1080p. • "Film Mode" does not function when you set the "AV Mode" to "Game". • "Film Mode" is not available during PC format input. Digital Noise Reduction Produces a clearer video image. Off: No adjustment High/Middle/Low: Select a desired level for viewing a clearer video image. • "Digital Noise Reduction" is not available during PC format input. 3D-Y/C Provides high quality images with minimal dot crawl and cross color noise. Slow: For still images. Standard: Normal adjustment. Fast: For moving images. • 3D-Y/C is available for input signal from Composite Video and analog broadcasts (air and cable). Monochrome For viewing a video in monochrome. On: For viewing in monochrome. Off: Normal color. Range of OPC The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of +16 and a minimum of -16. Max.: -15 through +16 Min.: -16 through +15 • The range of OPC settings are active only when the OPC is set to "On". • The maximum setting cannot be set to a smaller number than the minimum setting. • The minimum setting cannot be set to a bigger number than the maximum setting. • Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small. Audio Menu You can adjust the sound quality to your preference with the following settings. Example Audio Treble [ 0] a15 b15 Bass [ 0] a15 b15 Balance [ 0] L R Surround [Off] Bass Enhancer [On] Reset 1 Press MENU to display the MENU screen, and then press c/d to select "Audio". 2 Press a/b to select a specific adjustment item. • Select "Surround" or "Bass Enhancer" and then press ENTER to set each item. 3 Press a/b (or c/d) to select the desired setting, and then press ENTER. 4 Press MENU to exit. Selected item cbutton dbutton Treble For weaker treble For stronger treble Bass For weaker bass For stronger bass Balance Decrease audio from Decrease audio from the right speaker the left speaker • Audio menu is grayed out when Output Select is set to "Variable". (See page 29.) • For resetting all Audio adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press c/d to select "Yes", and then press ENTER. Surround Surround function allows you to enjoy realistic "live" sound. On: Surround function is on. Off: Normal sound. • You can choose Surround by pressing SURROUND on the remote control unit. (See page 15.) • Audio menu is grayed out when Output Select is set to "Variable". (See page 29.) • For some discs, setup may be required on your DVD player. In this case, please refer to the operation manual of your DVD player. Bass Enhancer This function allows you to enjoy bass-enhanced sound. On: Bass Enhancer function is on. Off: Normal sound. • Audio menu is grayed out when Output Select is set to "Variable". (See page 29.) 22