Sharp LC-52D92U LC-46D92U LC-52D92U Operation Manual - Page 27
Antenna Setup - DIGITAL
UPC - 074000363878
View all Sharp LC-52D92U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Basic adjustment settings Channel memory setting 1 Press MENU to display the MENU screen, and then press c/d to select "Setup". 2 Press a/b to select "CH Setup", and then press ENTER. • If you already set the Secret No., input the 4-digit secret number here. See page 43 for setting a secret number. 3 Press a/b to select "CH Memory", and then press ENTER. 4 Press a/b to select ANALOG (Air), ANALOG (Cable), DIGITAL (Air) or DIGITAL (Cable), and then press ENTER. 5 When viewing ANALOG broadcasts: 1 Press c/d to select the channel to skip, and then press b to move down. 2 Press c/d to select "On", and then press ENTER. When viewing DIGITAL broadcasts: 1 Press a/b to select the channel to skip, and then press c/d to select "On". • On: Skips channels. (Channel selection disabled using CH r/s.) • Off: Does not skip channels. (Channel selection enabled using CH r/s.) 6 Press MENU to exit. NOTE • Make sure what kind of connection is made with your TV. 3 Press a/b to select "Signal Strength". • The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel. Signal Strength Channel Strength Signal Strength Current 0 Max 0 4 Press MENU to exit. Channel Strength The channel signal strength can also be checked separately. 1 Repeat steps 1 to 2 in Signal Strength in Antenna Setup - DIGITAL 2 Press a/b to select "Channel Strength", and then press ENTER. 3 Input the 2-digit channel number to check the signal strength of the selected channel. • Make sure the signal is strong enough for each channel. Signal Strength Channel Strength 1 2 CH Signal Strength Current 0 Max 0 Antenna Setup - DIGITAL In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the "Antenna Setup - DIGITAL" screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength. Signal Strength 1 Press MENU to display the MENU screen, and then press c/d to select "Setup". 4 Press MENU to exit. NOTE • This function is available for DIGITAL (Air) only. 2 Press a/b to select "Antenna Setup DIGITAL", and then press ENTER. 25