Sharp LC-65D90U LC-65D90U Operation Manual - Page 81

Appendix Removing the stand Before detaching (or attaching) stand, unplug the AC cord from the AC input terminal. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching stand • Before performing work make sure to turn off the TV. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 1 2 3 4 Unfasten the four screws used to secure the bracket in place. Unfasten the eight screws used to secure the stand in place. Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.) Attach the stand hole covers (supplied with the product). CAUTION • Do not remove the stand from the TV unless using an optional bracket to mount it. NOTE • To attach the stand, perform the above steps in reverse order. Setting the TV on the wall CAUTION • Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury. Using an optional bracket to mount the TV • You can ask a qualified service professional about using an optional bracket to mount the TV to the wall. • Carefully read the instructions that come with the bracket before beginning work. 80