Sharp LC-C6554U Service Manual - Page 10

LC-C6554U Appendix Removing the Stand Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal. CAUTION Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching the stand Before performing work, make sure to turn off the TV. 1 2 Unfasten the four screws used to secure the stand in place. Detach the stand from the TV. To attach the stand, perform the above steps in reverse order. Setting the TV on the Wall CAUTION This TV should be mounted on the wall only with the wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury. Using an optional bracket to mount the TV You can ask a qualified service professional about using an optional AN-65AG1 bracket to mount the TV on the wall. Carefully read the instructions that come with the bracket before beginning work. Hanging on the wall AN-65AG1 wall mount bracket. (See the bracket instructions for details.) About setting the TV angle AN-65AG1 0o/ 5o/ 10o The "A" position is at the center of the display. Refer to the operation manual of AN-65AG1 for details. Vertical mounting Angular mounting Detach the cable clamp on the rear of the TV when using the optional mount bracket. To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV. 2 - 3