Sharp LC20SH3U LC-20SH3U Operation Manual - Page 12

Basic Operation Turning On and Off the Main Power POWER Switching the Input Modes (INPUT1/INPUT2/TV) POWER indicator 1 Turn on the power of the connected video equipment. 2 Press INPUT ( )/( ) to select the applicable input source. The screen changes in order of INPUT1, INPUT2 and TV mode each time INPUT is pressed. INPUT1 (COMPONENT) mode INPUT1 480P ● Press POWER. The POWER indicator instantly changes from red to green and the LCD TV set is turned on. 2 On-screen display INPUT2 mode INPUT2 STEREO SAP MONO 11:53AM A • The On-screen display disappears after a few seconds. ● To turn off the main power, press POWER again. Standby TV mode 2 A • INPUT1 : Used for video equipment connected to the COMPONENT input terminals. • INPUT2 : Used for video equipment connected to the INPUT2 terminal. The S-video input terminal is additionally provided for the INPUT2. If both the S-video terminal and normal video terminals are connected with cables, the S-video input terminal takes priority. To turn off the LCD TV set Press POWER. The POWER indicator will turn red. To turn the LCD TV set back on Press POWER again. The POWER indicator will turn green.