Sharp LC22SB27U LC-22SB27U Operation Manual - Page 28

Appendix Specifications Item Model: LC-22SB27U LCD panel 22" Class (211/2 Diagonal) Active Matrix (a-Si TFT LCD) Resolution 1,049,088 pixels (1366 x 768) TV Function TV-standard (CCIR) Receiving VHF/UHF Channel CATV American TV Standard ATSC/NTSC System VHF 2-13ch, UHF 14-69ch 1-135ch (non-scrambled channel only.) Digital Terrestrial 2-69ch Broadcast (8VSB) Digital Cable*1 (64/256 QAM) 1-135ch (non-scrambled channel only.) Audio multiplex BTSC System Audio out 1.5W x 2 Terminals Rear INPUT 1 AV in, S-VIDEO in INPUT 2 COMPONENT in, Audio in INPUT 3 HDMI in with HDCP, Audio in INPUT 4 15-pin mini D-sub female connector, Audio in (φ 3.5 mm jack) DIGITAL AUDIO OUTPUT Coaxial Digital audio output x 1 (PCM/Dolby Digital) ANT/CABLE 75 Ω Unbalance, F Type x 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE) HEADPHONE Mini-jack for stereo (φ 3.5 mm) OSD language English/French/Spanish Power Requirement AC 120 V, 60 Hz Power Consumption 42 W (0.8 W Standby with AC 120V) Weight TV + stand 10.4 Ibs./4.7 kg TV only 9.0 Ibs./4.1 kg Dimension*2 (W x H x D) TV + stand TV only 211/8 x 1519/32 x 759/64 inch 211/8 x 1415/32 x 241/64 inch Operating temperature +32°F to +104°F (0°C to +40°C) *1 Emergency alert messages via Cable are unreceivable. *2 The dimensional drawings are shown on the inside back cover. • Typical time for power output decrease of about one-half assuming continuous use in a room with normal lighting, normal brightness and temperature at 77°F/25°C • As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. CLEARING THE PASSWORD If you forget the password, clear the password using the following procedure. The password is 26 1 Press and hold both VOL - on the TV and press 0 on the remote control simultaneously for a few seconds until "Lock" menu appears on the screen. 2 Now the old password was cleared. You can set the new password. NOTE . • As a precautionary measure, make a note of your password above, cut it from this manual, and keep it in a safe place.