Sharp LC65SE94U LC-46SE94U LC-52SE94U LC-65SE94U Operation Manual - Page 9

QUICK REFERENCE STOP! To safely remove the AQUOS television from the box • It's best to use 2 people to remove the AQUOS television for stability. • Lift onto installation location as the diagram illustrates. Ventilation & Cleaning Tips Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use it near water. The AQUOS television is designed for AC use only and should be used with the supplied AC cord. Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners. The screen is glass and can be scratched or broken when dropped or impacted. QUICK INSTALLATION TIPS 1 Attach your antenna to the back of the AQUOS television. (See page 12.) 2 Connect the AC plug for the AQUOS television into the AC outlet. 4 How to turn on the AQUOS television for the first time. A) Press POWER on the AQUOS television. POWER LC-46SE94U LC-65SE94U LC-52SE94U AC outlet • Place the TV close to the AC outlet, and keep the power plug within reach. • This product must only be connected to a 120 V, 60 Hz, grounded (3-prong) outlet. Connecting it to any other kind of outlet will damage the product and invalidate the warranty. (LC-65SE94U only) • TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED. 3 Place the Ferrite core in the space indicated in the below figure and bundle the cords properly with the cable clamp and the cable tie. B) The POWER indicator on the front of the AQUOS television lights BLUE. POWER indicator • TV angle cannot be adjusted. Ferrite core 7