Sharp MX-1100 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 178
to scan the reverse side of, Select card shot settings.
View all Sharp MX-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Special Modes Card Shot (1) (2) OK Cancel OK X 3 3 8 (1~8 1/2) inch Fit to Page (A) Y 2 1 8 (1~8 1/2) inch 4 Size Reset (B) Select card shot settings. (1) Enter the original size. With the [X] key highlighted, enter the X (horizontal) dimension of the original with the keys. Touch the [Y] key and enter the Y (vertical) dimension of the original with the keys. (A) To enlarge or reduce the images to fit the paper based on the entered original size, touch the [Fit to Page] key. (B) The [Size Reset] key can be pressed to return the horizontal and vertical dimensions to the values set in "Card Shot Settings" in the system settings (administrator). (2) Touch the [OK] key. You will return to the base screen of copy mode. Make sure that the entered dimensions appear in the [Original] key. Press the [START] key ( 5 To cancel scanning... Press the [STOP] key ( ). ) to scan the front side of the card. Turn the card over and press the [START] key ( the card. 6 To cancel scanning... Press the [STOP] key ( ). ) to scan the reverse side of Place next original. Press [Start]. When finished, press [Read-End]. Touch the [Read-End] key. Copying will begin. 7 Read-End To cancel copying... Press the [STOP] key ( ). • The original must be placed on the document glass. • Copying is only possible on standard size paper. • XY Zoom cannot be used when using this function. • The image cannot be rotated when using this function. To cancel card shot... Touch the [Cancel] key in the screen of step 4. System Settings (Administrator): Card Shot Settings This is used to set the values to which the size returns when the [Size Reset] key is pressed. 1" to 8-1/2" (25 mm to 210 mm) can be entered for both the horizontal and vertical dimensions. The factory default settings are 3-3/8" (86 mm) for X (the width) and 2-1/8" (54 mm) for Y (the height). 82