Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 763
Finisher unit
View all Sharp MX-2600N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 763 highlights
SADDLE STITCH FINISHER Finisher unit TROUBLESHOOTING Open the front cover. 1 While pulling the lever, slide the saddle stitch finisher to the left until it stops. 2 Lower the staple case release lever and remove the staple case. 3 Pull the staple case out to the right. Raise the lever at the front end of the staple case and remove the jammed staple. Remove the leading staple if it is bent. If bent staples remain, a 4 staple jam will occur again. Take care that a bent staple does not hurt you. Lower the lever at the front end of the staple case. 5 8-9 Contents
8-9
TROUBLESHOOTING
Contents
SADDLE STITCH FINISHER
Finisher unit
1
Open the front cover.
2
While pulling the lever, slide the saddle
stitch finisher to the left until it stops.
3
Lower the staple case release lever and
remove the staple case.
Pull the staple case out to the right.
4
Raise the lever at the front end of the
staple case and remove the jammed
staple.
Remove the leading staple if it is bent. If bent staples remain, a
staple jam will occur again.
Take care that a bent staple does not hurt you.
5
Lower the lever at the front end of the
staple case.