Sharp MX-3100N Safety Guide - Page 10
Machine specifications / copier specifications Continued - dimensions
View all Sharp MX-3100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
SPECIFICATIONS Machine specifications / copier specifications (Continued) Paper sizes: A3W, A3, B4, A4, A4R, B5, B5R, A5R, envelopes, 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR (Includes automatic paper size detection function. Entry of paper sizes up to 297 mm x 432 mm (11-5/8" x 17") is possible.) Bypass tray Paper weights: Thin paper (55 g/m2 to 59 g/m2 (15 lbs. to 16 lbs.)), plain paper (60 g/m2 to 105 g/m2 (16 lbs. to 28 lbs.)), heavy paper (106 g/m2 to 256 g/m2 (28 lbs. bond to 140 lbs. index)), envelopes (75 g/m2 to 90 g/m2 (20 lbs. to 24 lbs.)) Paper capacity: Standard paper 100 sheets Paper types: SHARP-recommended plain paper, recycled paper, coloured paper, heavy paper, thin paper, transparency film, envelopes (Monarch, Com-10, DL, C5) Duplex module Paper sizes: A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"R, 8K, 16K, 16KR Paper weight: Plain paper (60 g/m2 to 105 g/m2 (16 lbs. to 28 lbs.)), heavy paper (106 g/m2 to 209 g/m2 (28 lbs. bond to 110 lbs. index)) Paper types: SHARP-recommended plain paper, recycled paper, coloured paper, and heavy paper Output method: Face-down output (A3W and 12" x 18" paper can be output to right tray, finisher, or saddle stitch finisher) Output tray (Center tray)*1 Output capacity: 500 sheets (using SHARP-recommended A4 or 8-1/2" x 11" paper) (The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper.) Tray full sensor: Yes Interface port LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T USB connectivity: Type A connector supports USB 2.0 (Hi speed)*2 Compatibility requirements of USB memory Memory capacity : Max. 32 GB Disk Format : FAT32 only Type B connector supports USB 2.0 (Hi speed) Required power supply Local voltage ±10% (For the power supply requirements, see the name plate in the lower corner of the left side of the machine.) Power consumption 220-240V: 1.84 kW / 100-127V: 1.44 kW Dimensions 620 mm (W) x 695 mm (D) x 950 mm (H) (24-13/32" (W) x 27-3/8" (D) x 37-25/64" (H)) Weight Approx. 116 kg (255.8 lbs.) Overall dimensions 970 mm (W) x 695 mm (D) (38-3/16" (W) x 27-3/8" (D)) (when bypass tray is extended) *1 Output tray (Center tray) cannot be used when the finisher or saddle stitch finisher is installed. *2 Type A connectors are located on the front of the machine and on the right side of the machine at the back (total of two connectors); however, the connectors cannot be used simultaneously. Only one of the connectors can be used. 8