Sharp MX-4111N Black-Toner SDS for - Page 5

Exposure controls/personal protection, Physical and chemical properties

Page 5 highlights

SAFETY DATA SHEET 7.2 Conditions for safe storage, including any incompatibilities Page : 5/9 Date Revised : May 20, 2015 Date Issued : Oct. 25, 2013 SDS No. F-02481 (US_EN) Requirements for storage : Keep tightly closed. Keep in a cool, well-ventilated place. areas and containers Store in accordance with the particular national regulations. Advice on common storage : Do not store with the following product types: Strong oxidizing agents Organic peroxides Explosives Gases 7.3 Specific end use(s) Specific use(s) : No data available SECTION 8: Exposure controls/personal protection 8.1 Control parameters Occupational Exposure Limits Components CAS-No. Value type (Form of Control parameters Basis exposure) Amorphous silica 7631-86-9 TWA 80 mg/m3/ (%SiO2) OSHA PEL TWA 3 mg/m3 ACGIH TLV Carbon black 1333-86-4 TWA 3.5 mg/m3 OSHA PEL TWA(Inhalable) 3 mg/m3 ACGIH TLV 8.2 Exposure controls Engineering measures Minimize workplace exposure concentrations. Apply measures to prevent dust explosions. Personal protective equipment Eye protection : Not required under intended use Hand protection : Not required under intended use Skin and body protection : Not required under intended use Respiratory protection : Not required under intended use SECTION 9: Physical and chemical properties 9.1 Information on basic physical and chemical properties Appearance : powder Colour : black Odour : odourless Odour Threshold : No data available pH : No data available 5 / 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

SAFETY
DATA
SHEET
Page : 5/9
Date Revised : May 20, 2015
Date Issued
: Oct. 25, 2013
SDS No. F-02481 (US_EN)
5
/
9
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage
: Keep tightly closed. Keep in a cool, well-ventilated place.
areas and containers
Store in accordance with the particular national regulations.
Advice on common storage
: Do not store with the following product types:
Strong oxidizing agents
Organic peroxides
Explosives
Gases
7.3 Specific end use(s)
Specific use(s)
: No data available
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Occupational Exposure Limits
Components
CAS-No.
Value type (Form of
exposure)
Control parameters
Basis
Amorphous silica
7631-86-9
TWA
80 mg/m3/
(%SiO2)
OSHA PEL
TWA
3 mg/m3
ACGIH TLV
Carbon black
1333-86-4
TWA
3.5 mg/m3
OSHA PEL
TWA(Inhalable)
3 mg/m3
ACGIH TLV
8.2 Exposure controls
Engineering measures
Minimize workplace exposure concentrations.
Apply measures to prevent dust explosions.
Personal protective equipment
Eye protection
: Not required under intended use
Hand protection
: Not required under intended use
Skin and body protection
: Not required under intended use
Respiratory protection
: Not required under intended use
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance
:
powder
Colour
: black
Odour
: odourless
Odour Threshold
: No data available
pH
: No data available