Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 7
Interior - drum
View all Sharp MX-6201N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
INTERIOR When a finisher / saddle stitch finisher is not installed (16) (17) (18)(19) (20) (21) (22) (23) (24) (25) (26) (16) Paper pass unit* This transfers output to the finisher or saddle stitch finisher. (17) Toner cartridges These contain toner for printing. When the toner runs out in a cartridge, the cartridge of the color that ran out must be replaced. ☞ REPLACING THE TONER CARTRIDGES (page 74) (18) Fusing unit Heat is applied here to fuse the transferred image onto the paper. Caution The fusing unit is hot. Take care not to burn yourself when removing a paper misfeed. (19) Transfer belt During full color printing, the toner images of each of the four colors on each of the photoconductive drums are combined together on the transfer belt. During black and white printing, only the black toner image is transferred onto the transfer belt. Do not touch or damage the transfer belt. This may cause a defective image. (20) Right side cover Open this cover to operate the fusing unit pressure adjusting lever and to remove a misfeed. ☞ Fusing unit pressure adjusting levers (page 43) (21) Paper reversing section cover This is used when 2-sided printing is performed. Open this cover to remove a paper misfeed. (22) Bypass tray Use this tray to feed paper manually. When loading paper larger than 8-1/2" x 11"R or A4R, be sure to pull out the bypass tray extension. ☞ LOADING PAPER IN THE BYPASS TRAY (page 38) (23) Main power switch This is used to power on the machine. When using the fax or Internet fax functions, keep this switch in the "on" position. ☞ TURNING THE POWER ON AND OFF (page 16) (24) Waste toner box This collects excess toner that remains after printing. ☞ REPLACING THE WASTE TONER BOX (page 77) Your service technician will collect the waste toner box. (25) Waste toner box compartment cover Open this to remove a paper misfeed from trays 1 to 4, or to replace the waste toner box. (26) Right side cover release lever To remove a paper misfeed, pull and hold this lever up to open the right side cover. * Peripheral device. 7