Sharp MX-950 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 84
Problems Related To Machine Operation
View all Sharp MX-950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
• System settings Descriptions of system settings similar to the following example appear in this chapter. Example: ➞ System Settings (Administrator) > "Copy Settings" > "Other Settings" > "Rotation Copy Setting" > This is an abbreviated description of the procedure for selecting the setting. ">" indicates the setting sequence and indicates the state of the setting after it has been enabled. Use these descriptions as a quick manual to help you configure the settings. (For detailed explanations of the system settings (Administrator), see the Administrator's Guide.) • For problems common to all functions of the machine and peripheral devices, see this manual. • If you are unable to solve a problem using the solutions in this chapter, switch off the [POWER] key ( ) and the main power switch. Wait at least 10 seconds, and then switch on the main power switch and the [POWER] key ( ) in that order. * Do not turn off the machine's main power switch or remove the power plug while a job is being executed or processed. This may damage the hard drive or cause the data being stored or received to be lost. • If you are unable to solve a problem using the information in this chapter, please contact your dealer or nearest SHARP Service Department. PROBLEMS RELATED TO MACHINE OPERATION Problem Specified machine functions cannot be used. The operation panel cannot be used. Point to check Have functions been disabled by the administrator? Is the main power indicator lit? Did you just power on the machine? Is the [POWER SAVE] key ( ) blinking? Is a cover open or a device separated from the machine? Did login fail three times in a row? Solution Some functions may have been disabled in the system settings (administrator). Check with your administrator. When user authentication is enabled, the functions that you can use and page counts may be restricted in your user settings. Check with your administrator. If the main power indicator is not lit, make sure that the power plug is firmly inserted in the power outlet, switch the main power switch to the "on" position. Hold down the [POWER] key ( ) and turn on the power. ☞ TURNING THE POWER ON AND OFF (page 18) After the [POWER] key ( ) is turned on, the machine requires some time to complete warmup operation. During this time functions can be selected, however, a job cannot be run. Wait until a message appears indicating that the machine is ready. Auto Power Shut-Off mode has activated. To return the machine to normal operation, press the [POWER SAVE] key ( ). ☞ TURNING THE POWER ON AND OFF (page 18) A warning message will appear when a cover is open or a device is separated from the machine. Read the message and take appropriate action. When "A Warning when Login Fails" is enabled in the system settings (administrator) and login fails 3 times in a row, a warning will be displayed and operation will lock for 5 minutes. After operation unlocks, log in using the correct user information. (If you do not know your user information, contact your administrator.) 84