Sharp MX-C304W MX-C303W MX-C304W User Manual - Page 7

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE INTERIOR (1) (2) (3) (4) (1) Toner cartridge This cartridge contains toner. When the toner in a cartridge runs out, replace with new one. ► REPLACEMENT OF TONER CARTRIDGE (page 1-131) (2) Waste toner box This container collects excess toner that remains after printing. ► REPLACING THE WASTE TONER BOX (page 1-134) A service technician collects replaced waste toner box. (3) Fusing unit paper guide Open to remove misfed paper. (4) Fusing unit release levers Push down these levers to release the pressure when removing misfed paper from inside the fusing area or when feeding an envelope from the bypass tray. • The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or injury. • When pressing down the levers, slowly press down from above using your fingers. Take care that your fingers do not become pinched while pressing. If you press too hard, there is a risk that your fingers will be knocked back by the levers. (5) (6) (7) (8) (5) Right cover of paper feed unit (when a paper feed unit is installed) Open this to remove a paper misfeed in tray 2 to 5. (6) Duplex conveyor cover This unit is used for reversing paper when 2-sided printing is performed. Open this cover to remove a paper misfeed. (7) Right side cover Open this cover to remove a paper misfeed. (8) Roller rotating knob Rotate to remove a paper misfeed. 1-4