Sharp NP-PX2201UL Installation Guide - NEC - Page 14

Sharp NEC Display Solutions of America, Inc. PX2201UL Installation Guide Desktop and Ceiling Mount PC Control Codes Function POWER ON POWER OFF INPUT SELECT HDMI1 INPUT SELECT HDMI2 INPUT SELECT COMPUTER INPUT SELECT BNC INPUT SELECT DVI-D INPUT SELECT DisplayPort INPUT SELECT 3G-SDI INPUT SELECT HDBaseT Code Data 02H 00H 00H 00H 00H 02H 02H 01H 00H 00H 00H 03H 02H 03H 00H 00H 02H 01H A1H A9H 02H 03H 00H 00H 02H 01H A2H AAH 02H 03H 00H 00H 02H 01H 01H 09H 02H 03H 00H 00H 02H 01H 02H 10H 02H 03H 00H 00H 02H 01H 9CH A4H 02H 03H 00H 00H 02H 01H A6H AEH 02H 03H 00H 00H 02H 01H C4H CCH 02H 03H 00H 00H 02H 01H BFH C7H Rev 1.0 Cable Connection Communication Protocol: Baud Rate: 9600 bps (for cable lengths longer than 20', it is recommended changing to 9600 bps in setup menu) Data Length: 8 bits Parity: No Parity Stop Bit: One bit X on/off: None Communications: Full duplex Note 1 : Pins 1, 4, 6, and 9 are used inside the projector. Note 2: For long cable runs it is recommended to set communication speed within the projector to 9600 bps. Note 3: Jumper "Request to Send" and "Clear to Send" together on both ends of the cable to simplify cable connection. www.sharpnecdisplays.us PX2201UL Page 14 of 14