Sharp PG-C45SL PG-C45S Operation Manual

Sharp PG-C45SL Manual

Get Sharp PG-C45SL PDF manuals and user guides View all Sharp PG-C45SL manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PG-C45SL manual content summary:

  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 1
    OPERATION MANUAL MODEL PG-C45S LCD PROJECTOR Introduction Connections and Setup Basic Operation Easy to Use Functions Appendix
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 2
    packaging, please be sure that you have checked the contents of the carton thoroughly against the list of "Supplied accessories" on page 14. Model No.: PG-C45S Serial No.: This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/ EEC. Dieses Ger
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 3
    be inserted elsewhere into a 10A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 4
    en anglais, allemand, français, suédois, espagnol, italien, néerlandais, portugais, chinois, coréen et arabe. Veuillez lire attentivement ces instructions avant de faire fonctionner le projecteur. Den medföljande CD-ROM-skivan innehåller bruksanvisningar på engelska, tyska, franska, svenska, spanska
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 5
    this operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 6
    . REPLACE WITH SAME SHARP LAMP UNIT TYPE BQC-XGC50X//1 ONLY. UV RADIATION : CAN CAUSE EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING. MEDIUM PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 7
    performance of the motion detect I/P conversion. Extensive improvements on the jagged edges or slanted lines in moving images. • Color Management System Supports sRGB. Enables individual settings of lightness, chromatic value and hue for six target colors. • Noise Reduction Allows for a clear image
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 8
    Contents Introduction Outstanding Features 3 Contents 4 IMPORTANT SAFEGUARDS 6 How to Access the PDF Operation Manuals (Windows, Macintosh 9 Part Names 10 Projector (Front and Top View 10 Projector (Rear View 11 Remote Control (Front View 12 Remote Control (Top View 12
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 9
    the Lamp Timer 87 Connecting Pin Assignments 88 (RS-232C) Specifications and Command Settings 89 Wired Remote Control Terminal Specifications 92 Computer Compatibility Chart 93 Troubleshooting 94 For SHARP Assistance 96 Specifications 97 Dimensions 98 Glossary 99 Index 100 -5
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 10
    the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 11
    operating instructions. Adjust only those controls that are covered by the operating instructions, of any service or repairs to this product, ask the service technician to software licensed to SHARP Corporation by Lineo, Public License (version 2), which Lineo supports. You may obtain a copy of
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 12
    should only be performed by a Sharp Authorized Projector Dealer or Service Center. Do not set up the operation manuals of the projector and the equipment to be connected for instructions on how I If the projector starts to overheat due to setup problems or block- age of the air vents, " " and
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 13
    ) that you want to view. 6 Double click the installation program and follow the instructions on the screen. For Macintosh: 1 Insert the CD-ROM in the CD-ROM that you want to view. 5 Double click the "C45S" pdf file to access the projector manuals. Note • If the desired pdf file cannot be opened
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 14
    Part Names Numbers in refer to the main pages in this operation manual where the topic is explained. Projector (Front and Top View) Power (ON/OFF) 34 buttons Turn the power on or off. Power indicator 34 Illuminates
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 15
    a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector. Carrying the projector Before carrying the projector, fully extend the carrying handle. -11
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 16
    Part Names Remote Control (Front View) KEYSTONE button 38 For adjusting Keystone or Digital Shift setting. ENTER button 42 For setting items selected or adjusted on the menu. UNDO button 39 For undoing an operation or returning to the default settings. ENLARGE (Enlarge/Reduce) 55 buttons For
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 17
    Using the Remote Control Introduction Available Range of the Remote Control I The remote control can be used to control the projector within the ranges shown in the illustration. Note • The signal from the remote control can be reflected off a screen for easy operation. However, the effective
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 18
    (attached) PCAPHA003WJSA Extra air filter PFILDA005WJZZ Sharp Advanced Presentation Software CD-ROM UDSKAA014WJZZ Operation manual (this manual) Quick reference label Optional cables 3 RCA on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center. -14
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 19
    Connections and Setup Connections and Setup
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 20
    a computer, be sure that it is the last device to be turned on after all the connections are made. • Be sure to read the operation manuals of the devices to be connected before making connections. This projector can be connected to: A computer using: I An RGB cable and a computer audio cable (See
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 21
    Connecting the Power Cord Plug in the supplied power cord into the AC socket on the rear of the projector. Supplied accessory Power code Connections and Setup -17
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 22
    . Contact your nearest Sharp Authorized Projector Dealer or Service Center. • Depending on the computer you are using, an image may not be projected unless the signal output setting of the computer is switched to the external output. Refer to the computer operation manual
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 23
    Connections and Setup "Plug and Play" function (when connecting to a 15-pin terminal) I This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible computer will communicate their setting requirements, allowing for quick and easy setup. I Before using the "
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 24
    Connecting the Projector to Other Devices Connecting to Video Equipment Connecting to Video Equipment Using an S-video, a Composite Video or an Audio Cable Using an S-video, video, or audio cable, a VCR, laser disc player or other audio-visual equipment can be connected to INPUT 3, INPUT 4 and
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 25
    Connections and Setup Connecting to Component Video Equipment Use a 3 RCA to 15-pin D-sub cable when connecting to the INPUT 1 or 2 terminal, component video equipment such as DVD players and DTV* decoders. *DTV is the umbrella term used to describe the new digital television system in the United
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 26
    Connecting the Projector to Other Devices Connecting to an Amplifier Connecting to an Amplifier or Other Audio Components Using a ø3.5 mm stereo minijack to RCA audio cable, an amplifier or other audio components can be connected to the AUDIO OUTPUT terminal. Connect the projector to the amplifier
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 27
    This may damage your computer. • The RS-232C function may not operate if your computer terminal is not correctly set up. Refer to the operation manual of the computer for details. • See page 88 for connection of an RS232C serial control cable. Supplied accessory DIN-D-sub RS-232C adaptor Optional
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 28
    Connecting the Projector to Other Devices Connecting to a Monitor Watching Images on Both the Projector and a Monitor You can display computer images on both the projector and a separate monitor using two sets of an RGB cable. An RGB cable is supplied with this projector. You need to buy another
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 29
    with the Microsoft Windows OS and Mac OS. However, this function does not work with the following operation systems that do not support USB. • Versions earlier than Windows 95. • Versions earlier than Windows NT4.0. • Versions earlier than Mac OS 8.5. Supplied accessory Notebook computer USB cable
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 30
    used due to the range or positioning of the projector (rear projection, etc.), connect a ø3.5 mm minijack cable (commercially available or available as Sharp service part QCNW4870CEZZ) from the WIRED R/C JACK on the top of the remote control to the WIRED REMOTE control input terminal. WIRED REMOTE
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 31
    Setup Using the Adjustment Feet The height of the projector can be adjusted using the adjustment feet at the front and back of the projector when the surface the projector is placed on is uneven or when the screen is slanted. The projection of the image can be made higher by adjusting the projector
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 32
    Setup Adjusting the Lens The image is focused and adjusted to the desired size using the focus ring or zoom knob on the projector. Focus ring Zoom knob 1 The focus is adjusted by rotat- ing the focus ring. 2 Zooming is adjusted by mov- ing the zoom knob. Zoom out Zoom in -28
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 33
    be used with this projector. An optional lens (AN-C12MZ) from Sharp is also available for specialized application. Contact your local Sharp Authorized Projector Dealer for details on the lens. (Refer to the lens installation manual when attaching a lens.) Throw Distance I The graph below is for 100
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 34
    Setup Screen Size and Projection Distance Screen Base line Horizontal line passing through the lens center Lens center H L Projection distance Standard Lens Throw ratio 1:1.77 to 2.25 NORMAL Mode (4:3) Picture (Screen) size Diag. (X) Width Height Projection distance (L) Maximum (L1)
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 35
    Connections and Setup AN-C12MZ Throw ratio 1:1.18 to 1.48 NORMAL Mode (4:3) Picture (Screen) size Diag. (X) Width Height 300" (762 cm) 240" (609.6 cm) 180" (457.2 cm) 250" (635 cm) 200" (508 cm) 150" (381 cm) Projection distance (L) Maximum (L1) Minimum (L2) 30' 5" (9.26 m) 24' 3" (7.38
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 36
    . Ceiling-mount setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately.) (ANXGCM55
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 37
    Basic Operation Basic Operation
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 38
    Image Projection Basic Procedure Connect the required external equipment to the projector before operating the following procedures. Info • The language preset at the factory is English. If you want to change the on-screen display to another language, reset the language according to the procedure
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 39
    3 Press , , or on the remote control to select the INPUT mode. • After pressing once on the projector, use to select the desired input mode. Note •When no signal is received, "NO SIGNAL."will be displayed. When a signal that the projector is not preset to receive is received, "NOT REG." will be
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 40
    Image Projection 5 Press to temporarily turn off the sound. Note • Pressing again will turn the sound back on. 6 Press , then press again while the confirmation message is displayed, to turn off the projector. Note • If you accidentally pressed and do not want to turn off the power, wait until
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 41
    Basic Operation 3 Press ' or " to select the de- sired language, and then press . 4 Press . • The desired language will be set as the on-screen display. -37
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 42
    Correcting Trapezoidal Distortion (Keystone Correction) Correcting Trapezoidal Distortion This function allows for Keystone (On-screen Trapezoidal Distortion) Correction. Note • When the image is projected either from top or from bottom towards the screen at an angle, the image becomes distorted
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 43
    Digital Shift Setting For easier viewing, this function shifts the entire image projected on the screen up or down when projecting 16:9 images from DVD players and DTV* decoders. * DTV is the umbrella term used to describe the new digital television system in the United States. Press ' to move the
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 44
    Reset English Deutsch Español Nederlands Français Italiano Svenska Português FAO VAO OFF Level 1 Level 3 Normal Level A Level B Save Image Delete Sharp Custom Blue None Sharp Custom None Power Save [ON/OFF] Mntr.out/RS232 [ON/OFF] Auto Power Off [ON/OFF] Front Ceiling + Front Rear Ceiling + Rear
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 45
    Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp -30 +30 Red -30 +30 Blue -30 +30 CLR Temp -3 +3 Reset A Level B Auto PAL (50/60Hz) SECAM NTSC4.43 NTSC3.58 PAL-M PAL-N Sharp Custom Blue None Sharp Custom None Power Save [ON/OFF] Mntr.out/RS232 [ON/OFF] Auto Power Off
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 46
    Using the Menu Screen This projector has two sets of menu screens that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following procedure. Menu screen for INPUT 1 or INPUT 2 RGB mode Menu screen for INPUT 3 or
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 47
    Basic Operation 2 Press \ or | to select the menu you want to adjust. Note • For details on the menus, see the tree charts on pages 40 and 41. 3 Press ' or " to select the item you want to adjust. Note • To display a single adjustment item, press after selecting the item. Only the menu bar and the
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 48
    Using the Menu Screen Menu Selections (Settings) 1 Press . • The menu screen is displayed. Note • The "Picture" menu screen for the selected input mode is displayed. • The on-screen display shown on the lower right is displayed when INPUT 1 or 2 mode is selected. 2 Press \ or | to select the menu
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 49
    4 Press |. • The cursor shifts to the sub menu. 5 Press ' or " to select the set- ting of the item displayed in the sub menu. 6 Press . • The item selected is set. Note • Some adjustment items will display a confirmation message. When setting an item, press \ or | to select "Yes" or "OK" and then
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 50
    of an image Skin tones become purplish Skin tones become greenish For making sharper or softer the contour of an image For less sharpness For more sharpness For adjusting the redness level For weaker red For stronger red For adjusting the blue level For adjusting the color temperature of an
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 51
    Basic Operation Progressive Mode This function allows you to select the progressive display of a video signal. The progressive display projects a smoother video image. Select "Progressive Mode" in the "Picture" menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Note • 2D
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 52
    Adjusting Computer Images Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in portions of the screen. Selected Item Clock Phase H-Pos V-Pos Description Adjusts vertical noise. Adjusts horizontal noise (similar to tracking on your VCR). Centers the on-
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 53
    Selecting Adjustment Settings Adjustment settings stored in the projector can be easily accessed. Select "Select Setting" in the "Fine Sync" menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. Note • If a memory position has not been set, a resolution and frequency setting
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 54
    " High Speed": • Auto Sync adjustment will occur when the projector is turned on or when the inputs are switched, when connected to a computer. Manual adjustments should be performed: • When the optimum image cannot be achieved with Auto Sync adjustment. See page 48. • Auto Sync adjustment may take
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 55
    Easy to Use Functions Easy to Use Functions
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 56
    Selecting the Picture Display Mode This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose "NORMAL", "FULL", "DOT BY DOT", "BORDER", "STRETCH" or "SMART STRETCH" image. Switching the Picture Display Using
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 57
    VIDEO 480I, 480P, 580I, 580P, 4:3 aspect ratio. NTSC, PAL, SECAM Letter box, squeeze 540P 16:9 aspect ratio 720P, 1035I, 1080I 16:9 aspect ratio NORMAL 800 × 600 - - FULL - 800 × 600 - • "STRETCH" is fixed when 720P, 1035I or 1080I signals are entered. * The Digital Shift function can be
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 58
    Displaying a Still Image This function allows you to instantly freeze a moving image. This is useful when you want to display a still image from a computer or video, giving you more time to explain the image to the audience. Freezing a Moving Image 1 Press . • The projected image is frozen. FREEZE
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 59
    Enlarging a Specific Portion of an Image This function allows you to enlarge a specific portion of an image. This is useful when you want to display a detailed portion of the image. Displaying an Enlarged Portion of an Image 1 Press . • Enlarges the image. • Pressing or enlarges or re- duces
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 60
    presentations. Gives greater depth to darker portions of image for a more exciting theater experience. Allows you to adjust gamma value using Sharp Advanced Presentation Software. Adjusting Gamma Correction 1 Press . • Each time is pressed, the gamma level toggles between the different types of
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 61
    Displaying Dual Pictures (Pict in Pict) Picture in Picture function allows you to display two pictures on the same screen. You can display the image input from INPUT 3 or 4 as an inset picture overlapping the main picture from INPUT 1 or 2. Displaying the Inset Picture 1 Press . 2 Press or on the
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 62
    Black Screen Function This function can be used to display a black screen. Blacking out the Projected Image 1 Press . • The screen turns black and "BLACK SCREEN" is displayed on the screen. 2 To return to the original projected image, press again. " Projected Image BLACK SCREEN button 58 -58
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 63
    Displaying the Break Timer This function can be used to show the remaining time for break during meeting. Displaying and Setting the Break Timer 1 Press . The break timer starts to count down from 5 minutes. 2 When " " is displayed, press ' , " , \ or | to set the break timer. • You can set
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 64
    " in the "C.M.S." menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. -60 Selected item Standard Custom 1-3 sRGB Description Sharp default setting "Lightness", "Chroma" and "Hue" can be adjusted for each of the six colors. The mode changes to sRGB Red Yellow Green Cyan
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 65
    Setting the Brightness of the Target Color Select "Lightness" in the "C.M.S." menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. Setting the Chromatic Value of the Target Color Select "Chroma" in the "C.M.S." menu on the menu screen. ➝ For operating the menu screen, see
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 66
    Color Management System (C.M.S.) Resetting User-Defined Color Settings Select "Reset (This Color)" or "Reset (All Colors)" in the "C.M.S." menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. Selected item Reset (This Color) Reset (All Colors) Description "Lightness", "
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 67
    Setting the Audio Output Type This function allows you to set the audio output type. Selected Item FAO (Fixed audio output) VAO (Variable audio output) Description Audio output that does not vary in strength with the volume level of the source projector. Audio output that varies in strength with
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 68
    to the input mode in which signals are being received, when turning on the projector or pressing on the projector. • OFF For switching input modes manually in order by pressing on the projector. • To stop searching for the input mode, press on the projector, or , , or on the remote control. Info
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 69
    Video Digital Noise Reduction (DNR) System Digital Noise Reduction (DNR) provides high quality images with minimal dot crawl and cross color noise. Reducing Image Noise Select "DNR" in the "Options (1)" menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. Note • Set a level
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 70
    Setting the Video System The video input system mode is preset to "Auto"; however, a clear picture from the connected audio-visual equipment may not be received, depending on the video signal difference. In that case, switch the video signal. Setting the Video System Select "Video System" in the "
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 71
    Saving Projected Images • This projector allows you to capture projected images (RGB signals) and set them as a startup image, or background image when no signals are being received. • You can capture the images that are input using RGB signals. Capturing the Image Select "Image Capture" in the "
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 72
    Image This function allows you to select the image displayed when no signal is being sent to the projector. Selected Item Description Sharp SHARP default image Custom *1 User customized image (e.g. company logo) Blue Blue screen None Black screen *2 *1 You can set a captured image as
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 73
    connection is set to "ON". Monitor Out/RS-232C connection is set to "OFF". Note • Set "Mntr.out/RS232" to "ON" when using the Sharp Advanced Presentation Software. Status ON (Low power mode) OFF (Standard mode) Brightness 80% 100% Power consumption 290 W 340 W Lamp Life 2,000 hours 1,500 hours
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 74
    . Note • It is recommended that the lamp be changed when the remaining lamp life becomes 6%. For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or Service Center. • The table at the right indicates rough estimates in the case of using only in each mode shown. Remaining lamp
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 75
    Reversing/Inverting Projected Images This projector is equipped with a reverse/invert image function that allows you to reverse or invert the projected image for various applications. Selected Item Front Ceiling + Front Rear Ceiling + Rear Normal image Inverted image Reversed image Reversed and
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 76
    input box will be displayed. • Make sure that both the projector and computer are set for the same baud rate. Refer to the computer's operation manual for instructions for setting the computer's baud rate. -72
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 77
    Setting up a Password A password can be set by the user to prevent adjustments to certain settings on the "Options (2)" menu. Using a password together with the Keylock Level (page 71) is more effective. Entering the Password Select "Password" in the "Options (2)" menu on the menu screen. ➝ For
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 78
    Setting up a Password Changing the Password Select "Password" in the "Options (2)" menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. 1 Press ', " and | to enter the password in "Old Password" and press . 2 Press ', " and | to set the new password and press . 3 Enter the
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 79
    place where only authorized users have access. If you lose or forget your keycode, you will need to contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 96). You may need to bring your projector to them to restore the projector to original factory condition (password
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 80
    Setting the Anti-Theft 2 Enter the remaining 3 digits by pressing any buttons you like. 3 Enter the same keycode once more in "Reconfirm". Note • The Keylock function will become temporarily disabled. When "Anti-Theft" is set, the keycode inputting box appears after the power is turned on. When it
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 81
    Initializing the Settings This function allows you to initialize the settings you have made in the projector. Returning to the Default Settings Select "All Reset" in the "Options (2)" menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. Note • If a password has been set, the
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 82
    Displaying the Adjustment Settings This function can be used to display all the adjusted settings as a list on the screen. Overview of All Menu Settings Select the "Status" menu on the menu screen and press . ➝ For operating the menu screen, see pages 42 to 45. -78
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 83
    Appendix Appendix
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 84
    Maintenance Cleaning the projector I Be sure to unplug the power cord before clean- ing the projector. I The cabinet as well as the operation panel is made of plastic. Avoid using benzene or thinner, as these can damage the finish on the cabinet. I Do not use volatile agents such as insecticides on
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 85
    100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location. • Ask your nearest Sharp Authorized Projector Dealer or Service Center to exchange the filter (PFILDA005WJZZ) when it is no longer possible to clean. Cleaning and replacing the bottom air filter
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 86
    Replacing the Air Filter 4 Clean the air filter. • Clean the dust off the air filter and cover with a vacuum cleaner extension hose. 5 Replace the air filter. • Place the air filter underneath the tabs on the filter cover. 6 Replace the filter cover. • Slide the filter cover in the direction of the
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 87
    projector will not turn on. Maintenance indicator Condition Problem Possible Solution Temperature warning indicator Normal Off Abnormal Red . (See page 86) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 96) for repair. • Please exercise care
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 88
    Maintenance Indicators Info • If the temperature warning indicator illuminates, and the power turns off, follow the above possible solutions and then wait until the projector has cooled down completely before plugging in the power cord and turning the power back on. (At least 5 minutes.) • If the
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 89
    projector to the nearest Sharp Authorized Projector Dealer or Service Center for repair. Purchase a replacement lamp unit of type BQCXGC50X//1 from your nearest Sharp Authorized Projector Dealer or Service Center. Then carefully change the lamp by following the instructions described in this section
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 90
    . (Only the silver screws are loosened). • Please refer to the installation manual included with the lamp unit. 1 Press on the projector to turn off 81 and 82). 4 Remove the lamp unit cover. • Loosen the user service screw that secures the lamp unit cover. Then open the cover in the direction
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 91
    lamp cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Securing screw User service screw Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. 1 Connect the power cord. • Plug the power cord into the AC socket
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 92
    Connecting Pin Assignments INPUT 1/2 RGB and OUTPUT Signal Terminal: 15-pin Mini D-sub female connector RGB Input Component Input 1. Video input (red) 1. PR (CR) 2. Video input (green/sync on green) 2. Y 3. Video input (blue) 3. PB (CB) 4. Reserve input 1 4. Not connected 5. Composite
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 93
    . Command format C1 C2 C3 C4 P1 P2 P3 P4 Return code (0DH) Command 4-digit Response code format Normal response Parameter 4-digit Problem response (communication error or incorrect command) O K Return code (0DH) E R R Return code (0DH) Info • When more than one code is being sent, send
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 94
    INPUT 1 BRIGHT (-30 - +30) INPUT 1 RED (-30 - +30) INPUT 1 BLUE (-30 - +30) INPUT 1 COLOR (-30 - +30) INPUT 1 TINT (-30 - +30) INPUT 1 SHARP (-30 - +30) INPUT 1 CLR TEMP (-3 - +3) INPUT 1 DISPLAY INPUT 1 ADJUSTMENT RESET INPUT 2 CONTRAST (-30 - +30) INPUT 2 BRIGHT (-30 - +30) INPUT 2 RED (-30 - +30
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 95
    .58 VIDEO SYSTEM SELECTION : PAL_M VIDEO SYSTEM SELECTION : PAL_N BACKGROUND SELECTION : SHARP BACKGROUND SELECTION : CUSTOM BACKGROUND SELECTION : BLUE BACKGROUND SELECTION : NONE STARTUP IMAGE SELECTION : SHARP STARTUP IMAGE SELECTION : CUSTOM STARTUP IMAGE SELECTION : NONE AUTO POWER OFF : NO
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 96
    are fixed at "10110". • Codes C14 and C15 are reverse confirmation bits, with "10" indicating "Front" and "01" indicating "Rear". Sharp remote control signal format Transmission format: 15-bit format D D D D D D D D D D D D D 67.5 ms 67.5 ms Wave form of output signal: Output using
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 97
    list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/ MAC/ WS Details on how to change display modes can be found in your notebook computer's operation manual. • When this projector receives 640 × 350 VESA format VGA signals, "640 × 400
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 98
    Troubleshooting Problem No picture and no sound or projector does not start. Check • Projector power cord is not plugged into the wall outlet. • Power to the external
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 99
    Troubleshooting Problem Pict in Pict does not work. Power cannot be turned on or off using the power buttons on the projector. Picture is green on INPUT 1
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 100
    If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 94 and 95. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 101
    Specifications Product type LCD Projector Model PG-C45S Video system NTSC 3.58/NTSC 4.43/PAL/PAL Extra air filter, Lens cap (attached), Projector manual and technical reference CD-ROM, Sharp Advanced Presentation Software CD-ROM, Operation manual, Quick reference label Replacement parts Lamp unit (
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 102
    Dimensions Units: inches (mm) Side View Rear View Top View Side View 1/8 (4) 11 9/16 (294) 8 7/16 (213.3) 3/16 (5.2) 1/16 (1.5) Front View Bottom View -98 4 1/8 (104) 4 15/16 (124.5) 5/16 (7.5) 9/16 (15) 3 15/16 (99) 2 1/8 1 3/4 (54.5) (44.5) 15 3/8 (390) 5 (126.5) 1/16 (1.5) 3 1/8 (
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 103
    Glossary Advanced intelligent compression High quality resizing of lower and higher resolution images to fit the projector's native resolution. Anti-theft If the "Keycode" set in the projector is not correctly entered, the projector will not operate even if signals are entered. Aspect Ratio Width
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 104
    Index 2D Progressive 47 3D Progressive 47 AC socket 17 Adjusting Computer Images 48 Adjusting the Lens 28 Adjusting the Picture 46 Adjustment buttons 42 Adjustment feet 27 Air filter 81 All Reset 77 Anti-Theft 75 Aspect ratio 52 AUDIO input 1, 2 terminal 18 AUDIO (L/R) input 3, 4
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 105
    Save Setting 48 Select Setting 49 Selecting the on-screen display language .......... 36 Signal Info 49 Signal Type 46 SMART STRETCH 53 Speaker 63 Special Modes 49 sRGB 60 Startup image 68 Status 78 STRETCH 53 Supplied accessories 14 Target 60 Temperature warning indicator 83 UNDO
  • Sharp PG-C45SL | PG-C45S Operation Manual - Page 106
    SHARP CORPORATION
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
LCD PROJECTOR
MODEL
PG-C45S
OPERATION MANUAL
Introduction
Connections and Setup
Basic Operation
Easy to Use Functions
Appendix