Sharp PG-C45SL PG-C45S Operation Manual - Page 56
Selecting the Picture Display Mode, Switching the Picture, Display Using Different, Input Signals
View all Sharp PG-C45SL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Selecting the Picture Display Mode This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose "NORMAL", "FULL", "DOT BY DOT", "BORDER", "STRETCH" or "SMART STRETCH" image. Switching the Picture Display Using Different Input Signals Press . • Each time is pressed, the display changes as shown on page 52 and 53. Info • In the Dot by Dot Mode, images are displayed in the original resolution, therefore they will not be enlarged. • To return to the standard image, press while "RESIZE" is displayed on the screen. RESIZE button Screen display of the picture display mode COMPUTER 4:3 aspect ratio Other aspect ratios SVGA (800 × 600) XGA (1024 × 768) SXGA (1280 × 960) SXGA+ (1400 × 1050) SXGA (1280 × 1024) NORMAL 800 × 600 800 × 600 800 × 600 800 × 600 750 × 600 • "NORMAL" is fixed when SVGA (800 × 600) signals are entered. FULL - - - - 800 × 600 DOT BY DOT - 1024 × 768 1280 × 960 1400 × 1050 1280 × 1024 Input Signal Output screen image NORMAL FULL DOT BY DOT Projects a full screen image Projects a full screen image Projects the original resolution while maintaining the aspect ratio. while ignoring the aspect ratio. signal of the image. Resolution lower than SVGA 4:3 aspect ratio SVGA 4:3 aspect ratio Resolution higher than SVGA 4:3 aspect ratio SXGA (1280 × 1024) -52