Sharp PG-F312X PG-F312X, PG-F262X, PG-F212X Operation Manual - Page 32
Image Projection Continued
UPC - 074000365537
View all Sharp PG-F312X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Image Projection (Continued) Correcting Trapezoidal Distortion When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally.The function for correcting trapezoidal distortion is called Keystone Correction. Adjustment buttons (P/R/O/Q) Note • The Keystone Correction can be adjusted up to an angle of approximately ±40 degrees and the screen can also be set up to an angle of approximately ±40 degrees (when the resize mode is set to "NORMAL" (see page 30)). 1 Press KEYSTONE to enter the Keystone Correction mode. • You can also display the on-screen display of the Keystone Correction mode with KEYSTONE on the projector. 2 Press P/Q or O/R to adjust the Keystone Correction. • You can also adjust the Keystone Correction using the adjustment buttons on the projector. Note • To return to the default setting, press RETURN while the on-screen display of the Keystone Correction mode is on the screen. RETURN button KEYSTONE button On-screen display (Keystone Correction mode) KEYSTONE 0 ADJUST END Shrinks upper side. (Move the slide bar in the + direction.) Shrinks lower side. (Move the slide bar in the - direction.) 3 Press KEYSTONE. • The on-screen display of the Keystone Correction mode will disappear. • You can also use KEYSTONE on the projector. Info • While adjusting the image using Keystone Correction, straight lines and the edges of the image may appear jagged. 28