Sharp PGF310X PG-F310X Operation Manual - Page 54

Cleaning and Replacing the Dust Filters, Cleaning the Dust Filters

Page 54 highlights

Cleaning and Replacing the Dust Filters Cleaning the Dust Filters Info • The dust filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location. 1 Press STANDBY/ON on the projector to put the projector into standby mode. • Wait until the cooling fan stops. • Disconnect the power cord and unplug the power cord from the AC socket. STANDBY/ON button AC socket 2 Remove the filter holders. • Turn the projector over. To remove the filter holders, press in the tabs while lifting up. 3 Clean the dust off the dust filters and the holders with a hand broom. 50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

50
Cleaning and Replacing the Dust Filters
Cleaning the Dust Filters
The dust filters should be cleaned every 100
hours of use. Clean the filters more often when
the projector is used in a dusty or smoky
location.
Press
STANDBY/ON
on the projec-
tor to put the projector into standby
mode.
• Wait until the cooling fan stops.
• Disconnect the power cord and unplug
the power cord from the AC socket.
Remove the filter holders.
• Turn the projector over. To remove the fil-
ter holders, press in the tabs while lifting
up.
Clean the dust off the dust filters
and the holders with a hand
broom.
Info
1
2
3
AC socket
STANDBY/ON button