Sharp PN-E802 User Manual - Page 51

Specifications - 80

Get Sharp PN-E802 PDF manuals and user guides View all Sharp PN-E802 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Specifications nProduct Specifications Model PN-E802 LCD component 80" Class [80 inch (203.2cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 1.06 billion colors Pixel pitch 0.923 mm (H) × 0.923 mm (V) Viewing angle 176° right/left/up/down (contrast ratio ≥ 10) Screen active area inch (mm) 69-3/4 x 39-1/4 (1771.2 x 996.3) Computer input signal Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω] Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green, Composite sync (TTL: positive/negative) Video color system NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM Plug and play VESA DDC2B Power management VESA DPMS, DVI DMPM Input terminals PC/AV Digital HDMI x 1 PC Analog Mini D-sub 15 pin, 3 rows x 1 Audio 3.5 mm mini stereo jack x 1 Serial (RS-232C) D-sub 9 pin x 1 When PN-ZB01 PC/AV (optional) is PC attached AV Digital DVI-D 24 pin (HDCP compatible) x 1 Analog BNC *1*2 x 1 Composite video BNC x 1 S-video x 1 Component BNC (Y, Cb/Pb, Cr/Pr) *1 x 1 Audio RCA pin (L/R) x 2 Output terminals Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 When PN-ZB01 PC/AV Digital (optional) is External speaker attached DVI-D 24 pin x 1 7 W + 7 W [6 Ω] LAN terminal [When PN-ZB01 (optional) is attached] 10 BASE-T/100 BASE-TX Speaker output 7 W + 7 W Power requirement AC 100 V - 240 V, 3.1 A, 50/60 Hz Operating temperature *3 32°F to 104°F (0°C to 40°C) Operating humidity 20% to 80% (no condensation) Power consumption 265 W / 1.0 W / 1.0 W (Maximum / input signal waiting mode *4 / standby mode *5) Power consumption [When PN-ZB01 (optional) is attached] 270 W Dimensions (excluding protrusions) inch (mm) Approx. 73-9/16 (W) x 4-13/16 (D) x 43-1/16 (H) (1869 x 123 x 1094) Weight lbs. (kg) Approx. 174.2 (79) (excluding the temporary stand used in the package for transportation) Weight [PN-ZB01 (optional)] lbs. (kg) Approx. 1.102 (0.5) *1 Cannot be used simultaneously. *2 Does not support plug and play. *3 Temperature condition may change by setting up condition. Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. *4 When AUTO INPUT CHANGE is set to OFF. *5 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. 51 E

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
51
E
Specifications
n
Product Specifications
Model
PN-E802
LCD component
80" Class [80 inch (203.2cm) diagonal] TFT LCD
Max. resolution
(pixels)
1920 x 1080
Max. colors
Approx. 1.06 billion colors
Pixel pitch
0.923 mm (H) × 0.923 mm (V)
Viewing angle
176
° right/left/up/down (contrast ratio ≥ 10)
Screen active area
inch (mm)
69-3/4 x 39-1/4 (1771.2 x 996.3)
Computer input signal
Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75
Ω
]
Sync signal
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Power management
VESA DPMS, DVI DMPM
Input terminals
PC/AV
Digital
HDMI x 1
PC
Analog
Mini D-sub 15 pin, 3 rows x 1
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
D-sub 9 pin x 1
When PN-ZB01
(optional) is
attached
PC/AV
Digital
DVI-D 24 pin (HDCP compatible) x 1
PC
Analog
BNC
*
1
*
2
x 1
AV
Composite video
BNC x 1
S-video
x 1
Component
BNC (Y, Cb/Pb, Cr/Pr) *
1
x 1
Audio
RCA pin (L/R) x 2
Output terminals
Audio
RCA pin (L/R) x 1
Serial (RS-232C)
D-sub 9 pin x 1
When PN-ZB01
(optional) is
attached
PC/AV
Digital
DVI-D 24 pin x 1
External speaker
7 W + 7 W
[6
Ω
]
LAN terminal
[
When PN-ZB01 (optional) is attached
]
10 BASE-T/100 BASE-TX
Speaker output
7 W + 7 W
Power requirement
AC 100 V - 240 V, 3.1 A, 50/60 Hz
Operating temperature
*
3
32°F to 104°F (0°C to 40°C)
Operating humidity
20% to 80% (no condensation)
Power consumption
(Maximum / input signal waiting mode
*
4
/ standby
mode
*
5
)
265 W / 1.0 W / 1.0 W
Power consumption
[
When PN-ZB01 (optional) is attached
]
270 W
Dimensions (excluding protrusions)
inch (mm)
Approx. 73-9/16 (W) x 4-13/16 (D) x 43-1/16 (H) (1869 x 123 x 1094)
Weight
lbs. (kg)
Approx. 174.2 (79) (excluding the temporary stand used in the package
for transportation)
Weight [PN-ZB01 (optional)]
lbs. (kg)
Approx. 1.102 (0.5)
*1
Cannot be used simultaneously.
*2
Does not support plug and play.
*3
Temperature condition may change by setting up condition.
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
*4
When AUTO INPUT CHANGE is set to OFF.
*5
When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.