Sharp PN-G655U PNG655U Operation Manual - Page 16
Turning Power On/Off - remote control
View all Sharp PN-G655U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Turning Power On/Off Caution • Turn on the monitor first before turning on the PC or playback device. Turning on the main power Main power switch TIPS • If the monitor is in the input signal standby mode and you press the POWER button on the remote control unit, the monitor enters standby mode. • You can turn on/off the monitor by pressing the power switch of the monitor. • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode. Date/time setting • If the time has yet to be set when the monitor is first turned on, the date/time setting screen appears. Set the date and time. DATE/TIME SETTING // : : SET 20 07 / 01 / 01 00 : 00 When the main power switch is off, the monitor cannot be turned on using the POWER button on the remote control unit. CANCEL Turning power on/off Press the POWER button to turn the power ON/OFF. INPUT Status of a power LED Green lighting Orange lighting Green flashing Power LED Status of the monitor Power "On" Power "Off" (Standby mode) Input signal standby mode (input using a PC) Caution • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. OK···[MENU] 1. Press , , or to select the date and time, and press or to change the numerical values. 2. Select SET and then press MENU . • Be sure to set the date and time. • The date/time setting screen will close automatically if no operation is performed for about 15 seconds. The date and time can be set using DATE/TIME SETTING from the OPTION menu when the date/time setting screen disappears. TIPS • Set the date in "Year/Month/Day" order. • Set the time on a 24-hour basis. • The clock stops after the power-off status continues for approximately 1 week.* The date/time setting screen appears at power-on. Be sure to set the date and time. (* This is a guide. The power-off status that stops the clock depends on the status of the monitor.) Disabling power on/off operations Power on/power off operations can be disabled in order to protect the monitor from an accidental power off. Set the ADJUSTMENT LOCK in FUNCTION menu to "2". (See page 24.) E 14