Sharp PN-L602B PN-L802B Professional LCD Monitor Operation Manual - Page 8
Mounting Precautions - wall mount
View all Sharp PN-L602B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
MOUNTING PRECAUTIONS • This product is for use indoors. • A mounting bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility for accidents or injuries caused by improper mounting or mishandling. • This monitor cannot be used in vertical orientation. • Use the monitor with the surface perpendicular to a level surface. If necessary, the monitor may be tilted up to 20 degrees upward. • When moving the monitor, be sure to hold it with the handles and the unit bottom. Do not grasp the screen, sensor, corners, tray, or power button. This may cause product damage, failure, or injury. • This monitor should be used at an ambient temperature between 41°F (5°C) and 95°F (35°C). Provide enough space around the monitor to prevent heat from accumulating inside. Unit: inch [cm] 7-7/8 [20] 1-7/16 [3.5] • Fix the USB cable with the cable clamp (supplied). (1) Coil the cable into two loops approx. 1-9/16 inches (4 cm) in diameter at approx. 5-7/8 inches (15 cm) from the mini USB connector. (2) Attach the cable clamp to the cable clamp attachment next to the USB port. (3) Clamp the loops of the USB cable with the cable clamp. (2) (3) (1) • This monitor is fi xed to the temporary stand when shipped from the factory. Please note that this stand is for temporary use only until the monitor is properly mounted. 2 2 [5] [5] 2 [5] • If it is difficult to provide sufficient space for any reason such as the installation of the monitor inside a housing, or if the ambient temperature may be outside of the range of 41°F (5°C) to 95°F (35°C), install a fan or take other measures to keep the ambient temperature within the required range. • Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. • Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction. • Do not place the monitor on a device which generates heat. • Do not use the product in locations where the unit is exposed to direct sunlight or other strong light. Since this product operates with infrared rays, such light may cause a malfunction. E8