Sharp PN-L802B Quick Start Guide - Page 12
Names Of Parts And Components, Turning On The Power
View all Sharp PN-L802B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
NAMES OF PARTS AND COMPONENTS, TURNING ON THE POWER This machine has a main power switch, found at the bottom left after the front cover is opened, and a power button ( ), located on the operation panel. Turning on the power Main power indicator • Switch the main power switch to the " " position. The main power indicator will light in orange. The power button ( ) does not function while the main power indicator is lit in orange. • After the main power indicator lights in green, press the power button ( ). Turning off the power Power button Output tray (Center tray) Keyboard* Automatic document feeder Operation panel Right tray Finisher* (1) Press the power button ( ) to turn off the power. (2) Switch the main power switch to the " " position. Restarting the machine In order for some settings to take effect, the machine must be restarted. If a message in the touch panel prompts you to restart the machine, press the power button ( ) to turn off the power and then press the key again to turn the power back on. Main power switch Saddle Finisher* CAUTION • When turning off the power, make sure that the indicators on the operation panel turn off as well. • If the machine suddenly turns off, such as in the event of a power failure, turn the machine on again, and then turn off the machine following the correct procedure for turning off the machine. Switching off the main power switch or removing the power cord from the outlet while any of the indicators are lit or blinking may damage the hard drive and cause data to be lost. • Switch off both the power button ( ) and the main power switch and unplug the power cord if you suspect a machine failure, if there is a bad thunderstorm nearby, or when you are moving the machine. 12 Paper pass unit* Bypass tray Front cover Tray 5 (when a large capacity tray is installed)* Tray 1 Tray 2 (when a paper feed tray is installed)* Tray 3 (when a paper feed tray is installed)* Tray 4 (when a paper feed tray is installed)* * Optional • When using the fax or Internet fax function, always keep the main power switch in the " " position. • In some states of the machine, pressing the power button ( ) to restart will not make the settings take effect. In this case, use the main power switch to switch the power off and then on.