Sharp PN-L803C A Quick Start Setup Guide - Page 7

ENGLISH Supplied Components If any components are missing, please contact your dealer.  Liquid Crystal Display Monitor: 1  Remote control unit: 1  Power cord: 1  Remote control unit battery (R-6 ("AA" size)): 2  Cable clamp: 3  Cable clamp (insertion type): 4  CD-ROM (Utility Disk): 1  RS-232C conversion cable  SHARP Display Connect License: 1 (3.5mm mini jack): 1  Setup Manual (this manual): 1  Eraser (for capacitive touch panel): 1  Touch pen (for capacitive touch panel): 2  Camera mount: 1  Touch pen adapter: 1  Camera screw (inch thread): 1  Pen tip for touch pen  Touch pen adapter screw (Step screw, M3): 1 (for capacitive touch panel): 8  Speaker cover attachment screws (M3)/  Touch pen battery Camera mount screws (M3): 6 (LR-03 ("AAA" size)): 2  Vertical sticker (Logo): 1  Tray: 1  ID labels (for touch pen): 4 x 2  Speaker cover: 2  Cover SHARP logo: 1  USB cable: 1 Place this sticker onto the SHARP logo to cover the logo. * SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission. * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal instructions for your area. Preparing the Remote Control Unit and the Touch Pen Installing the batteries 1. Press the cover gently and slide it in the direction of the arrow. 2. See the instructions in the compartment and put in the supplied batteries (R-6 ("AA" size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover. Connecting the touch pen adapter To use the touch pen, insert the touch pen adapter into the touch pen adapter port on the monitor. Inserting the battery 2 touch pens are supplied. Insert the batteries in the touch pens. 1. Remove the battery cap. 2. Open the cover and insert the supplied battery (LR-03 ("AAA" size) x 1) into the touch pen. Check the plus (+) and minus (-) markings on the inside of the touch pen and insert the battery in the correct orientation. 2 1 3. Replace the cover and battery cap. Battery cap TIPS • To use an optional touch pen with the monitor, the touch pen must be registered in the touch pen adapter. (pairing) For details, see the Touch pen Management Tool operation manual. Touch pen adapter port Touch pen adaptor Touch pen adapter screw (antitheft) 5E