Sharp PN-LE901 PN-LE Series Operation Manual - Page 12
Initial Installation Continue - reset
View all Sharp PN-LE901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
>> Introduction
>>
<<
Introduction
Initial Installation (Continue)
Power Saving
Select "Yes" or "No" to configure default Display settings.
2
Press
/
to select "Yes" or "No".
Press
ENTER
to enter the setting.
Yes:
AV MODE is set to "STANDARD" and Automatically
Light Sensor is set to "On".
No:
AV MODE is set to "DYNAMIC (Fixed)" and
Automatically Light Sensor is set to "Off". Picture Reset
can be set.
Picture Reset:
AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off".
If you select "On" and there is no operation for 30 minutes:
- AV MODE will be reset to "DYNAMIC (Fixed)".
When "Off" is selected:
- Even after 30 minutes elapses, AV MODE is not reset to
"DYNAMIC (Fixed)".
Antenna & Cable/STB
Select the type of connection you will use to watch TV.
3
Press / to select "Antenna & Cable" or "Set-top box", and
then press
ENTER
.
To watch TV via an antenna or cable connection (without
using a set-top box):
Select "Antenna & Cable", and then go to step 4. To
watch TV via set-top box:
Select "Set-top box" and then press
ENTER
.
Check that the set-top box connected to the TV is on.
ENG 2-3