Sharp R-1501 R-1500 , R-1501 , R-1502 Microwave Operation Manual - Page 31
Replacing Parts
View all Sharp R-1501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
REPLACING PARTS CHARCOAL FILTER Charcoal Filter, Sharp part number RK-240 which was installed in your oven, is used for nonvented, recirculated installation. The filter should be changed every 6 to 12 months depending on use. See page 14 for ordering information. 1. Disconnect power to the oven at the circuit breaker panel or by unplugging. 2. Remove the three louver mounting screws and push down carefully on the tab at each end of the louver to disengage it. (See illustration.) 3. Pull the louver away from the unit. 4. Change the charcoal filter. 5. Carefully push the louver back into place (engaging both the bottom and top tabs) and replace the screws removed in step 2. Top tab WORK LIGHT AND NIGHT LIGHT 1. To replace light bulbs, first disconnect power to the oven at the circuit breaker panel or by unplugging. 2. To release cover, remove the screw on the light cover. (See illustration.) 3. Replace light bulbs with equivalent watt bulb available from your Sharp Authorized Servicer or parts distributor. Bulbs are also available at most hardware stores or lighting centers. DO NOT USE A BULB LARGER THAN 30 WATTS. 4. Close light cover and secure with screw removed in step 2. CAUTION: Light cover may become very hot. Do not touch glass when light is on. Charcoal filter (white side faces front) Louver Screw Screw Screw Light cover Screw Light bulbs Bottom tab 31