Sharp R-308NW R-307N , R-308N Operation Manual - Page 18

Cleaning And Care

Page 18 highlights

OTHER CONVENIENT FEATURES MINUTE PLUS Minute Plus allows you to cook for a minute at 100% by simply touching the MINUTE PLUS pad. You can also extend cooking time in multiples of 1 minute by repeatedly touching the MINUTE PLUS pad during manual cooking. • Suppose you want to heat a cup of soup for one minute at 100%. PROCEDURE 1 Touch MINUTE PLUS pad. MINUTE PLUS NOTE: 1. To use Minute Plus, touch pad within 3 minutes after cooking, closing the door or touching the STOP/ CLEAR pad. 2. Minute Plus cannot be used with Special Features. CLEANING AND CARE Disconnect the power cord before cleaning or leave the door open to inactivate the oven during cleaning. Exterior The outside surface is painted. Clean the outside with mild soap and water. Then wipe with a clean dampened cloth and polish dry with a soft cloth. Do not use any type of household or abrasive cleaner. Door Wipe the window on both sides with a damp cloth to remove any spills or spatters. Metal parts will be easier to maintain if wiped frequently with a soft damp cloth. Avoid the use of spray and other harsh cleaners as they may stain, streak or dull the door surface. When cleaning surfaces of door and oven that come together on closing the door, use only mild, non abrasive soaps, or detergents applied with a sponge or soft cloth. Touch Control Panel Wipe the panel with a soft cloth dampened slightly with water only. Dry with a soft cloth. Do not scrub or use any sort of chemical cleaners. Close door and touch STOP/CLEAR. Interior Cleaning is easy because little heat is generated to the interior surfaces; therefore, there is no baking and setting of spills or spattering. To clean the interior surfaces, wipe with a soft damp cloth. DO NOT USE ABRASIVE OR HARSH CLEANERS OR SCOURING PADS. For heavier soil, use baking soda or a mild soap; wipe clean with a soft damp cloth. NEVER SPRAY OVEN CLEANERS DIRECTLY ONTO ANY PART OF THE OVEN. Waveguide Cover The waveguide cover is made from mica so it requires special care. Keep the waveguide cover clean to assure good oven performance. Carefully wipe with a soft damp cloth any food spatters from the surface of the cover immediately after they occur. Built-up splashes may overheat and cause smoke or possibly catch fire. Do not remove the waveguide cover. Odor Removal Occasionally, a cooking odor may remain in the oven. To remove, combine 1 cup/250 ml water, grated peel and juice of 1 lemon and several whole cloves in a 2-cup/500 ml microwave-safe glass measuring cup. Boil for several minutes using 100% power. Allow to set in oven until cool. Wipe interior with a soft cloth. Turntable/ Turntable Support The turntable and turntable support can be removed for easy cleaning. Wash them in mild, sudsy water; for stubborn stains use a mild cleanser and non abrasive scouring sponge. They are also dishwasher-safe. Use upper rack of dishwasher. The turntable motor shaft is not sealed, so excess water or spills should be wiped up immediately. 18 1126 R-308N, 307N_En.indd 18 11/26/07 11:37:08 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21

18
OTHER CONVENIENT FEATURES
MINUTE PLUS
Minute Plus allows you to cook for a minute at 100% by
simply touching the
MINUTE PLUS
pad. You can also
extend cooking time in multiples of 1 minute by repeatedly
touching the
MINUTE PLUS
pad during manual cooking.
Suppose you want to heat a cup of soup for one minute
at 100%.
PROCEDURE
1
Touch
MINUTE PLUS
pad.
MINUTE PLUS
NOTE:
1. To use Minute Plus, touch pad within 3 minutes after
cooking, closing the door or touching the
STOP/
CLEAR
pad.
2. Minute Plus cannot be used with Special Features.
Disconnect the power cord before cleaning or leave the door open to inactivate the oven during cleaning.
Exterior
The outside surface is painted. Clean the outside with
mild soap and water. Then wipe with a clean dampened
cloth and polish dry with a soft cloth. Do not use any
type of household or abrasive cleaner.
Door
Wipe the window on both sides with a damp cloth to
remove any spills or spatters. Metal parts will be easier
to maintain if wiped frequently with a soft damp cloth.
Avoid the use of spray and other harsh cleaners as they
may stain, streak or dull the door surface.
When cleaning surfaces of door and oven that come
together on closing the door, use only mild, non abrasive
soaps, or detergents applied with a sponge or soft cloth.
Touch Control Panel
Wipe the panel with a soft cloth dampened slightly with
water only. Dry with a soft cloth. Do not scrub or use
any sort of chemical cleaners. Close door and touch
STOP/CLEAR
.
Interior
Cleaning is easy because little heat is generated to the
interior surfaces; therefore, there is no baking and setting
of spills or spattering. To clean the interior surfaces, wipe
with a soft damp cloth. DO NOT USE ABRASIVE OR
HARSH CLEANERS OR SCOURING PADS. For heavier
soil, use baking soda or a mild soap; wipe clean with a
soft damp cloth. NEVER SPRAY OVEN CLEANERS
DIRECTLY ONTO ANY PART OF THE OVEN.
Waveguide Cover
The waveguide cover is made from mica so it requires
special care. Keep the waveguide cover clean to assure
good oven performance. Carefully wipe with a soft damp
cloth any food spatters from the surface of the cover
immediately after they occur. Built-up splashes may
overheat and cause smoke or possibly catch
re. Do
not remove the waveguide cover.
Odor Removal
Occasionally, a cooking odor may remain in the oven. To
remove, combine 1 cup/250 ml water, grated peel and
juice of 1 lemon and several whole cloves in a 2-cup/500
ml microwave-safe glass measuring cup. Boil for several
minutes using 100% power. Allow to set in oven until cool.
Wipe interior with a soft cloth.
Turntable/Turntable Support
The turntable and turntable support can be removed
for easy cleaning. Wash them in mild, sudsy water; for
stubborn stains use a mild cleanser and non abrasive
scouring sponge. They are also dishwasher-safe. Use
upper rack of dishwasher. The turntable motor shaft is
not sealed, so excess water or spills should be wiped
up immediately.
CLEANING AND CARE
1126 R-308N, 307N_En.indd 18
1126 R-308N, 307N_En.indd
18
11/26/07 11:37:08 AM
11/26/07
11:37:08 AM