Sharp R-410 R-410 Microwave Operation Manual - Page 10

BEFORE OPERATING • Before operating your new microwave oven make sure you read and understand this operation manual completely. • Before the oven can be used, follow these procedures: 1. Plug in the oven. Close the door. The oven display will then begin flashing 8 8 : 8 8 . 2. Touch the STOP/CLEAR pad. : will appear. 3. Set clock. TO SET THE CLOCK • Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.). PROCEDURE DISPLAY TIMER 1 CLOCK Touch CLOCK pad. 12:30 21 2 3 0 Enter the correct time of day by touching the numbers in sequence. 12:30 3 TIMER CLOCK Touch CLOCK pad again. 12:30 This is a 12 hour clock. If you attempt to enter an incorrect clock time, ERROR will appear in the display. Touch the STOP/CLEAR pad and re-enter the time. • If the electrical power supply to your microwave oven should be interrupted, the display will intermittently show 8 8 : 8 8 after the power is reinstated. If this occurs during cooking, the program will be erased. The time of day will also be erased. Simply touch STOP/CLEAR pad and reset the clock for the correct time of day. NOTE: Your oven can be programmed with the door open except for START, MINUTE PLUS and INSTANT ACTION. STOP/CLEAR Touch the STOP/CLEAR pad to: 1. Erase if you make a mistake during programming. 2. Cancel timer. 3. Stop the oven temporarily during cooking. 4. Return the time of day to the display. 5. Cancel a program during cooking, touch twice. 8