Sharp RB-LC-52D82U LC-46D82U LC-52D82U Operation Manual - Page 32
Using external equipment
UPC - 890552624287
View all Sharp RB-LC-52D82U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Using external equipment Displaying an external equipment image To view external source images, select the input source from INPUT on the remote control unit or on the TV. Input Select If the image does not come in clearly from the external equipment connected to INPUT 1 or 2, you may need to change the input signal type setting on the "Input Select" menu. 1 Press MENU to display the MENU screen, and then press c/d to select "Option". 2 Press a/b to select "Input Select", and then press ENTER. Option Audio Only Digital Noise Reduction [Off] Input Select [Auto] Output Select [Fixed] 3 Press a/b to select the signal type you want to set, and then press ENTER. • If the selected signal type is incorrect, images are not displayed or displayed without any color. 1 Press INPUT. • A list of selectable sources appears. Auto COMPONENT VIDEO INPUT SOURCE TV INPUT1 INPUT2 INPUT3 4 Press MENU to exit. • The setting is stored and can be selected on the "INPUT SOURCE" menu. INPUT4 NOTE INPUT5 INPUT6 • Refer to your external equipment operation manual for the signal type. • If you set INPUT 1 or 2 to Auto, the TV will automatically select the input signal. Press INPUT again to select the input 2 source. • Check the operation manual of the external equipment for the signal type. • Setting INPUT 1 or 2 signal selection to "Auto" when • An image from the selected source automatically other equipment is connected will result in the following displays. connection priority. • Each time INPUT is pressed, the input source INPUT 1 or 2: toggles. 1 COMPONENT VIDEO • You can also select the input source by pressing a/b. 2 VIDEO • If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand. NOTE • See pages 13 to 15 for external equipment connection. 30