Sharp SD-EX220 SDEX220 Operation Manual - Page 19
Advanced CD Playback
View all Sharp SD-EX220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Advanced CD Playback SD-EX220 To remove the CD 1 While in the stop mode, press the button. 2 Press the CD eject button and remove the CD. 3 Press the button to close the CD cover. Push To locate the beginning of a track To move to the beginning of the next track: Press the button during playback. z You can skip to any track by pressing the button repeatedly until the desired track number appears. To restart the track being played: Press the button during playback. z You can skip to any track by pressing the button repeatedly until the desired track number appears. CD Playback - Listening to a CD / Advanced CD Playback - CD Eject Button Caution: z Do not open or close the CD cover manually. It may cause malfunctions to the unit. z Be careful not to jam your fingers in the CD cover. z Do not play discs with special shapes (heart- or octagon-shaped). It may cause malfunctions. z If the power fails while the CD cover is open, wait until the power is restored. z Keep foreign objects out of the CD compartment. z When the unit is not being used, be sure to close the CD cover. If it is left open, the lens may be covered with dust and the unit may not operate properly. z When the unit enters the stand-by mode, the opened CD cover will close automat- ically. Notes: z Subjecting the unit to shock or vibration may cause mistracking or skipping. z Playing certain CD at a high volume may cause mistracking. In this case, lis- ten at a lower volume. z If the recorded side of the CD is touched or becomes dirty, refer to "Care of com- pact discs" (page 30) and clean it. z If a disc is damaged or dirty, the sound may skip. z If an error message is displayed during CD operation, see "Error messages" on page 30. z If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. To locate the desired portion For audible fast forward: Press and hold down the button during playback. For audible fast reverse: Press and hold down the button during playback. Notes: z Normal playback will resume when the or button is released. z When the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. To search very quickly: When fast forward or fast reverse is used while in the pause mode, the playback point will move more quickly than when using audible fast forward or audible fast reverse playback. z In this mode, no sound is heard. Therefore, you should refer to the time display. z When you lift your finger, the unit will re-enter the pause mode. 19