Sharp SHA2850 CS-2850/2800 Operation Manual - Page 9

2) When the grand total mode selector is in the ON position (GT), the counter will count the number of times that the calculation results have been stored in the grand total memory. To print and clear the count, press the [q key. 3) (only CS-2850) The memory item counter will count the number of times that the F] key has been pressed in the addition. Note: • Each time the Ej key is used in the sub- straction, 1 will be subtracted from the count. • The count is printed when the memory is recalled. • Pressing of the ID key clears the counter. "IC+" position - 1) The counter will count the number of times that the I:I or has been pressed in addition and subtraction. Note: • The count is printed when the calculated result is obtained. • Pressing of the (11, C7 , C], AvG (only CS-2850) or mu, key clears the counter. 2) When the grand total mode selector is in the ON position (GT), the counter will count the number of times that the calculation results have been stored in the grand total memory. To print and clear the count, press the key. 3) (only CS-2850) The memory item counter will count the number of times that the g or El key has been pressed in addition and subtraction. Note: • The count is printed when the memory is recalled. • Pressing of the g key clears the counter. "•" position: Neutral, counter is turned off. Note: The counter has a maximum capacity of 3 digits (up to ±999). If the count exceeds the maximum, the counter will recount from zero. PAPER FEED KEY: When pressed, advances the paper. Note: You can also pull the paper manually. RIGHT SHIFT KEY: Operation of this key in entered numbers or calculated results shifts the number one digit to the right together with the decimal point. Used for one digit correction. 7