Sharp UP-810F UP-810F UP-820F Operation Manual - Page 144
Direct Key Programming
View all Sharp UP-810F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Direct Key Programming Use the following procedure to select direct-key programming: Direct PLU/COMBO/Dept. key You can assign PLUs, combo meals and departments directly to the keyboard. In the case of combo meals or PLUs, you may assign up to 5-levels to be accessed directly on the keyboard. Procedure In the case of setting "00020 DIRECT PLU" 1. In the SETTING window, select "02 DIRECT KEY." • The DIRECT KEY window will appear. Press the key on the keyboard you wish to program or select the desired key no. from the key numbers list (Refer to the next page). • TYPE (Use the selective entry method) PLU : Assigns the key as a direct PLU key. COMBO : Assigns the key as a direct combo key. DEPT : Assigns the key as a direct department key. NOTE • You can also select a direct PLU key by pressing the corresponding key when the PLU has been assigned directly on the keyboard instead of selecting the key from the menu. • When selecting a department, the screen on which a department code is to be entered (the message "DEPT. CODE") will appear. • When selecting a combo, the screen on which a combo table number is to be entered ("COMBO TBL#") will appear. • LEVEL1 thru 5 (Use the numeric entry method) Enter a PLU number or combo table number for each level. For example, if you want to use this key as PLU code 1 (level 1) and PLU code 101 (level 2), enter 1 for the "LEVEL1" and 101 for the "LEVEL2." - 142 -