Sharp UX 460 UX-460 Operation Manual - Page 39

2. Answering Machine Operating the Answering Machine Operating the Answering Machine Activating the answering machine Activate the answering machine before you go out as follows: Press the RECEPTION MODE key until the arrow in the display points to TAD. • The outgoing message will play (you can stop playback by pressing the STOP key). • It will not be possible to set the reception mode to TAD if a general outgoing message has not been recorded. RECEPTION MODE TEL FAX TAD When the reception mode is set to TAD, the UX-460 will answer incoming calls after two rings if it has received at least one incoming message, or after four rings if no messages have been received. (For more information, see Toll Saver in Remote Operations in this chapter.) Note: If the memory is full from messages previously recorded, MEMORY IS FULL will appear in the display. To set the reception mode to TAD, you must first erase some or all of the stored messages. Note: In TAD mode, the machine will automatically switch to fax reception if it detects a period of silence longer than six seconds after answering a call. For this reason, if a caller pauses for this length of time while leaving a message, they will be cut off. 37