Sharp UX-P115 UP-X115 Operation Manual - Page 71

Messages and Signals 8. Troubleshooting MEMORY IS FULL/ SEE MANUAL (alternating messages) MEMORY PRINTING NO DATA OFF HOOK ON HOOK DIAL OVER HEAT PRINT HEAD FAIL/ YOU NEED SERVICE (alternating messages) READY TO SEND RECALLING TOTAL PAGE(S) 01 The memory is full. This may occur during fax reception if too much data is received before the pages can be printed out. If faxes have been received to memory because printing is not possible (an additional message will indicate the problem), resolve the problem so that printing can continue (see Substitute Reception to Memory on page 46). If you are attempting to transmit from memory, see If the memory becomes full on page 39. If you are copying, see If MEMORY IS FULL appears on page 47. The fax is preparing to or printing out a document from memory. This appears if you attempt to search for an auto-dial number when none have been stored. This appears if you forgot to replace the handset after using it to dial and send a fax. Replace the handset or press the STOP key to clear the message. The SPEAKER key has been pressed and the fax machine is waiting for you to dial. The print head has overheated. Operation can be continued after it cools. If overheating frequently occurs, try changing the print contrast setting to LIGHT (see page 15). The print head has failed and requires service. A document has been loaded and the fax machine is waiting for you to begin faxing or copying. This appears if you attempt to send a fax by automatic dialing and the line is busy or the receiving fax machine does not answer. Your fax machine will automatically reattempt the call. (See Automatic redialing on page 36.) Number of pages transmitted, received, or copied. 69